Go to the first, previous, next, last section, table of contents.


7 MySQL Table Types

As of MySQL Version 3.23.6, you can choose between three basic table formats (ISAM, HEAP and MyISAM). Newer versions of MySQL support additional table types (InnoDB, or BDB), depending on how you compile it. A database may contain tables of different types.

When you create a new table, you can tell MySQL what type of table to create. The default table type is usually MyISAM.

MySQL will always create a `.frm' file to hold the table and column definitions. The table's index and data will be stored in one or more other files, depending on the table type.

If you try to use a table type that is not compiled-in or activated, MySQL will instead create a table of type MyISAM. This behaviour is convenient when you want to copy tables between MySQL servers that support different table types. (Perhaps your master server supports transactional storage engines for increased safety, while the slave servers use only non-transactional storage engines for greater speed.)

This automatic change of table types can be confusing for new MySQL users. We plan to fix this by introducing warnings in the new client/server protocol in version 4.1 and generating a warning when a table type is automatically changed.

You can convert tables between different types with the ALTER TABLE statement. See section 6.5.4 ALTER TABLE Syntax.

Note that MySQL supports two different kinds of tables: transaction-safe tables (InnoDB and BDB) and not transaction-safe tables (HEAP, ISAM, MERGE, and MyISAM).

Advantages of transaction-safe tables (TST):

Note that to use InnoDB tables you have to use at least the innodb_data_file_path startup option. See section 7.5.3 InnoDB Startup Options.

Advantages of not transaction-safe tables (NTST):

You can combine TST and NTST tables in the same statements to get the best of both worlds.

7.1 MyISAM Tables

MyISAM is the default table type in MySQL Version 3.23. It's based on the ISAM code and has a lot of useful extensions.

The index is stored in a file with the `.MYI' (MYIndex) extension, and the data is stored in a file with the `.MYD' (MYData) extension. You can check/repair MyISAM tables with the myisamchk utility. See section 4.4.6.7 Using myisamchk for Crash Recovery. You can compress MyISAM tables with myisampack to take up much less space. See section 4.7.4 myisampack, The MySQL Compressed Read-only Table Generator.

The following is new in MyISAM:

MyISAM also supports the following things, which MySQL will be able to use in the near future:

Note that index files are usually much smaller with MyISAM than with ISAM. This means that MyISAM will normally use less system resources than ISAM, but will need more CPU time when inserting data into a compressed index.

The following options to mysqld can be used to change the behaviour of MyISAM tables. See section 4.5.7.4 SHOW VARIABLES.

Option Description
--myisam-recover=# Automatic recovery of crashed tables.
-O myisam_sort_buffer_size=# Buffer used when recovering tables.
--delay-key-write=ALL Don't flush key buffers between writes for any MyISAM table
-O myisam_max_extra_sort_file_size=# Used to help MySQL to decide when to use the slow but safe key cache index create method. Note that this parameter is given in megabytes before 4.0.3 and in bytes beginning with this version.
-O myisam_max_sort_file_size=# Don't use the fast sort index method to created index if the temporary file would get bigger than this. Note that this parameter is given in megabytes before 4.0.3 and in bytes beginning with this version.
-O bulk_insert_buffer_size=# Size of tree cache used in bulk insert optimisation. Note that this is a limit per thread!

The automatic recovery is activated if you start mysqld with --myisam-recover=#. See section 4.1.1 mysqld Command-line Options. On open, the table is checked if it's marked as crashed or if the open count variable for the table is not 0 and you are running with --skip-external-locking. If either of the above is true the following happens.

If the recover wouldn't be able to recover all rows from a previous completed statement and you didn't specify FORCE as an option to myisam-recover, then the automatic repair will abort with an error message in the error file:

Error: Couldn't repair table: test.g00pages

If you in this case had used the FORCE option you would instead have got a warning in the error file:

Warning: Found 344 of 354 rows when repairing ./test/g00pages

Note that if you run automatic recover with the BACKUP option, you should have a cron script that automatically moves file with names like `tablename-datetime.BAK' from the database directories to a backup media.

See section 4.1.1 mysqld Command-line Options.

7.1.1 Space Needed for Keys

MySQL can support different index types, but the normal type is ISAM or MyISAM. These use a B-tree index, and you can roughly calculate the size for the index file as (key_length+4)/0.67, summed over all keys. (This is for the worst case when all keys are inserted in sorted order and we don't have any compressed keys.)

String indexes are space compressed. If the first index part is a string, it will also be prefix compressed. Space compression makes the index file smaller than the above figures if the string column has a lot of trailing space or is a VARCHAR column that is not always used to the full length. Prefix compression is used on keys that start with a string. Prefix compression helps if there are many strings with an identical prefix.

In MyISAM tables, you can also prefix compress numbers by specifying PACK_KEYS=1 when you create the table. This helps when you have many integer keys that have an identical prefix when the numbers are stored high-byte first.

7.1.2 MyISAM Table Formats

MyISAM supports 3 different table types. Two of them are chosen automatically depending on the type of columns you are using. The third, compressed tables, can only be created with the myisampack tool.

When you CREATE or ALTER a table you can for tables that doesn't have BLOBs force the table format to DYNAMIC or FIXED with the ROW_FORMAT=# table option. In the future you will be able to compress/decompress tables by specifying ROW_FORMAT=compressed | default to ALTER TABLE. See section 6.5.3 CREATE TABLE Syntax.

7.1.2.1 Static (Fixed-length) Table Characteristics

This is the default format. It's used when the table contains no VARCHAR, BLOB, or TEXT columns.

This format is the simplest and most secure format. It is also the fastest of the on-disk formats. The speed comes from the easy way data can be found on disk. When looking up something with an index and static format it is very simple. Just multiply the row number by the row length.

Also, when scanning a table it is very easy to read a constant number of records with each disk read.

The security is evidenced if your computer crashes when writing to a fixed-size MyISAM file, in which case myisamchk can easily figure out where each row starts and ends. So it can usually reclaim all records except the partially written one. Note that in MySQL all indexes can always be reconstructed:

7.1.2.2 Dynamic Table Characteristics

This format is used if the table contains any VARCHAR, BLOB, or TEXT columns or if the table was created with ROW_FORMAT=dynamic.

This format is a little more complex because each row has to have a header that says how long it is. One record can also end up at more than one location when it is made longer at an update.

You can use OPTIMIZE table or myisamchk to defragment a table. If you have static data that you access/change a lot in the same table as some VARCHAR or BLOB columns, it might be a good idea to move the dynamic columns to other tables just to avoid fragmentation:

7.1.2.3 Compressed Table Characteristics

This is a read-only type that is generated with the optional myisampack tool (pack_isam for ISAM tables):

7.1.3 MyISAM Table Problems

The file format that MySQL uses to store data has been extensively tested, but there are always circumstances that may cause database tables to become corrupted.

7.1.3.1 Corrupted MyISAM Tables

Even if the MyISAM table format is very reliable (all changes to a table is written before the SQL statements returns) , you can still get corrupted tables if some of the following things happens:

Typial typical symptoms for a corrupt table is:

You can check if a table is ok with the command CHECK TABLE. See section 4.4.4 CHECK TABLE Syntax.

You can repair a corrupted table with REPAIR TABLE. See section 4.4.5 REPAIR TABLE Syntax. You can also repair a table, when mysqld is not running with the myisamchk command. myisamchk syntax.

If your tables get corrupted a lot you should try to find the reason for this! See section A.4.1 What To Do If MySQL Keeps Crashing.

In this case the most important thing to know is if the table got corrupted if the mysqld died (one can easily verify this by checking if there is a recent row restarted mysqld in the mysqld error file). If this isn't the case, then you should try to make a test case of this. See section E.1.6 Making a Test Case If You Experience Table Corruption.

7.1.3.2 Clients is using or hasn't closed the table properly

Each MyISAM `.MYI' file has in the header a counter that can be used to check if a table has been closed properly.

If you get the following warning from CHECK TABLE or myisamchk:

# clients is using or hasn't closed the table properly

this means that this counter has come out of sync. This doesn't mean that the table is corrupted, but means that you should at least do a check on the table to verify that it's okay.

The counter works as follows:

In other words, the only ways this can go out of sync are:

7.2 MERGE Tables

MERGE tables are new in MySQL Version 3.23.25. The code is still in gamma, but should be reasonable stable.

A MERGE table (also known as a MRG_MyISAM table) is a collection of identical MyISAM tables that can be used as one. You can only SELECT, DELETE, and UPDATE from the collection of tables. If you DROP the MERGE table, you are only dropping the MERGE specification.

Note that DELETE FROM merge_table used without a WHERE will only clear the mapping for the table, not delete everything in the mapped tables. (We plan to fix this in 4.1).

With identical tables we mean that all tables are created with identical column and key information. You can't merge tables in which the columns are packed differently, doesn't have exactly the same columns, or have the keys in different order. However, some of the tables can be compressed with myisampack. See section 4.7.4 myisampack, The MySQL Compressed Read-only Table Generator.

When you create a MERGE table, you will get a `.frm' table definition file and a `.MRG' table list file. The `.MRG' just contains a list of the index files (`.MYI' files) that should be used as one. Before 4.1.1 all used tables had to be in the same database as the MERGE table itself.

For the moment, you need to have SELECT, UPDATE, and DELETE privileges on the tables you map to a MERGE table.

MERGE tables can help you solve the following problems:

The disadvantages with MERGE tables are:

When you create a MERGE table you have to specify with UNION=(list-of-tables) which tables you want to use as one. Optionally you can specify with INSERT_METHOD if you want insert for the MERGE table to happen in the first or last table in the UNION list. If you don't specify INSERT_METHOD or specify NO, then all INSERT commands on the MERGE table will return an error.

The following example shows you how to use MERGE tables:

CREATE TABLE t1 (a INT NOT NULL AUTO_INCREMENT PRIMARY KEY, message CHAR(20));
CREATE TABLE t2 (a INT NOT NULL AUTO_INCREMENT PRIMARY KEY, message CHAR(20));
INSERT INTO t1 (message) VALUES ("Testing"),("table"),("t1");
INSERT INTO t2 (message) VALUES ("Testing"),("table"),("t2");
CREATE TABLE total (a INT NOT NULL AUTO_INCREMENT, message CHAR(20), KEY(a))
             TYPE=MERGE UNION=(t1,t2) INSERT_METHOD=LAST;
SELECT * FROM total;

Note that we didn't create a UNIQUE or PRIMARY KEY in the total table as the key isn't going to be unique in the total table.

Note that you can also manipulate the `.MRG' file directly from the outside of the MySQL server:

shell> cd /mysql-data-directory/current-database
shell> ls -1 t1.MYI t2.MYI > total.MRG
shell> mysqladmin flush-tables

Now you can do things like:

mysql> SELECT * FROM total;
+---+---------+
| a | message |
+---+---------+
| 1 | Testing |
| 2 | table   |
| 3 | t1      |
| 1 | Testing |
| 2 | table   |
| 3 | t2      |
+---+---------+

Note that the a column, though declared as PRIMARY KEY, is not really unique, as MERGE table cannot enforce uniqueness over a set of underlying MyISAM tables.

To remap a MERGE table you can do one of the following:

7.2.1 MERGE Table Problems

The following are the known problems with MERGE tables:

7.3 ISAM Tables

The deprecated ISAM table type will disappear in MySQL version 5.0. In MySQL 4.1 it's included in the source but not compiled anymore. MyISAM is a better implementation of this table handler and you should convert all ISAM tables to MySAM tables as soon as possible.

ISAM uses a B-tree index. The index is stored in a file with the `.ISM' extension, and the data is stored in a file with the `.ISD' extension. You can check/repair ISAM tables with the isamchk utility. See section 4.4.6.7 Using myisamchk for Crash Recovery.

ISAM has the following features/properties:

Most of the things true for MyISAM tables are also true for ISAM tables. See section 7.1 MyISAM Tables. The major differences compared to MyISAM tables are:

If you want to convert an ISAM table to a MyISAM table so that you can use utilities such as mysqlcheck, use an ALTER TABLE statement:

mysql> ALTER TABLE tbl_name TYPE = MYISAM;

The embedded MySQL versions doesn't support ISAM tables.

7.4 HEAP Tables

HEAP tables use hashed indexes and are stored in memory. This makes them very fast, but if MySQL crashes you will lose all data stored in them. HEAP is very useful for temporary tables!

The MySQL internal HEAP tables use 100% dynamic hashing without overflow areas. There is no extra space needed for free lists. HEAP tables also don't have problems with delete + inserts, which normally is common with hashed tables:

mysql> CREATE TABLE test TYPE=HEAP SELECT ip,SUM(downloads) AS down
    ->                   FROM log_table GROUP BY ip;
mysql> SELECT COUNT(ip),AVG(down) FROM test;
mysql> DROP TABLE test;

Here are some things you should consider when you use HEAP tables:

The memory needed for one row in a HEAP table is:

SUM_OVER_ALL_KEYS(max_length_of_key + sizeof(char*) * 2)
+ ALIGN(length_of_row+1, sizeof(char*))

sizeof(char*) is 4 on 32-bit machines and 8 on 64-bit machines.

7.5 InnoDB Tables

7.5.1 InnoDB Tables Overview

InnoDB provides MySQL with a transaction-safe (ACID compliant) storage engine with commit, rollback, and crash recovery capabilities. InnoDB does locking on row level and also provides an Oracle-style consistent non-locking read in SELECTs. These features increase multiuser concurrency and performance. There is no need for lock escalation in InnoDB, because row level locks in InnoDB fit in very small space. InnoDB is the first storage manager in MySQL to support FOREIGN KEY constraints.

InnoDB has been designed for maximum performance when processing large data volumes. Its CPU efficiency is probably not matched by any other disk-based relational database engine.

InnoDB is used in production at numerous large database sites requiring high performance. The famous Internet news site Slashdot.org runs on InnoDB. Mytrix, Inc. stores over 1 TB of data in InnoDB, and another site handles an average load of 800 inserts/updates per second in InnoDB.

Technically, InnoDB is a complete database backend placed under MySQL. InnoDB has its own buffer pool for caching data and indexes in main memory. InnoDB stores its tables and indexes in a tablespace, which may consist of several files (or raw disk partitions). This is different from, for example, MyISAM tables where each table is stored as a separate file. InnoDB tables can be of any size even on operating systems where file-size is limited to 2 GB.

You can find the latest information about InnoDB at http://www.innodb.com/. The most up-to-date version of the InnoDB manual is always placed there.

InnoDB is published under the same GNU GPL License Version 2 (of June 1991) as MySQL. If you distribute MySQL/InnoDB, and your application does not satisfy the restrictions of the GPL license, you have to buy a commercial MySQL Pro license from https://order.mysql.com/?sub=pg&pg_no=1.

7.5.2 InnoDB in MySQL Version 3.23

From MySQL version 4.0, InnoDB is enabled by default. The following information only applies to the 3.23 series.

InnoDB tables are included in the MySQL source distribution starting from 3.23.34a and are activated in the MySQL -Max binary of the 3.23 series. For Windows the -Max binaries are contained in the standard distribution.

If you have downloaded a binary version of MySQL that includes support for InnoDB, simply follow the instructions of the MySQL manual for installing a binary version of MySQL. If you already have MySQL-3.23 installed, then the simplest way to install MySQL -Max is to replace the server executable `mysqld' with the corresponding executable in the -Max distribution. MySQL and MySQL -Max differ only in the server executable. See section 2.2.11 Installing a MySQL Binary Distribution. See section 4.7.5 mysqld-max, An Extended mysqld Server.

To compile MySQL with InnoDB support, download MySQL-3.23.34a or newer version from http://www.mysql.com/ and configure MySQL with the --with-innodb option. See the MySQL manual about installing a MySQL source distribution. See section 2.3 Installing a MySQL Source Distribution.

cd /path/to/source/of/mysql-3.23.37
./configure --with-innodb

To use InnoDB tables in MySQL-Max-3.23 you must specify configuration parameters in the [mysqld] section of the configuration file `my.cnf', or on Windows optionally in `my.ini'.

At the minimum, in 3.23 you must specify innodb_data_file_path where you specify the names and the sizes of datafiles. If you do not mention innodb_data_home_dir in `my.cnf' the default is to create these files to the datadir of MySQL. If you specify innodb_data_home_dir as an empty string, then you can give absolute paths to your datafiles in innodb_data_file_path.

The minimal way to modify it is to add to the [mysqld] section the line

innodb_data_file_path=ibdata:30M

but to get good performance it is best that you specify options as recommended. See section 7.5.3 InnoDB Startup Options.

7.5.3 InnoDB Startup Options

To enable InnoDB tables in MySQL version 3.23, see section 7.5.2 InnoDB in MySQL Version 3.23.

In MySQL-4.0 you are not required to do anything specific to enable InnoDB tables.

The default behaviour in MySQL-4.0 and MySQL-4.1 is to create an auto-extending 10 MB file `ibdata1' in the datadir of MySQL and two 5 MB `ib_logfile's to the datadir. (In MySQL-4.0.0 and 4.0.1 the datafile is 64 MB and not auto-extending.)

Note: To get good performance you should explicitly set the InnoDB parameters listed in the following examples.

If you don't want to use InnoDB tables, you can add the skip-innodb option to your MySQL option file.

Starting from versions 3.23.50 and 4.0.2, InnoDB allows the last datafile on the innodb_data_file_path line to be specified as auto-extending. The syntax for innodb_data_file_path is then the following:

pathtodatafile:sizespecification;pathtodatafile:sizespecification;...
...  ;pathtodatafile:sizespecification[:autoextend[:max:sizespecification]]

If you specify the last datafile with the autoextend option, InnoDB will extend the last datafile if it runs out of free space in the tablespace. The increment is 8 MB at a time. An example:

innodb_data_home_dir =
innodb_data_file_path = /ibdata/ibdata1:100M:autoextend

instructs InnoDB to create just a single datafile whose initial size is 100 MB and which is extended in 8 MB blocks when space runs out. If the disk becomes full you may want to add another datafile to another disk, for example. Then you have to look at the size of `ibdata1', round the size downward to the closest multiple of 1024 * 1024 bytes (= 1 MB), and specify the rounded size of `ibdata1' explicitly in innodb_data_file_path. After that you can add another datafile:

innodb_data_home_dir =
innodb_data_file_path = /ibdata/ibdata1:988M;/disk2/ibdata2:50M:autoextend

Be cautious on filesystems where the maximum file-size is 2 GB. InnoDB is not aware of the OS maximum file-size. On those filesystems you might want to specify the max size for the datafile:

innodb_data_home_dir =
innodb_data_file_path = /ibdata/ibdata1:100M:autoextend:max:2000M

A simple `my.cnf' example. Suppose you have a computer with 128 MB RAM and one hard disk. Below is an example of possible configuration parameters in `my.cnf' or `my.ini' for InnoDB. We assume you are running MySQL-Max-3.23.50 or later, or MySQL-4.0.2 or later. This example suits most users, both on Unix and Windows, who do not want to distribute InnoDB datafiles and log files on several disks. This creates an auto-extending datafile `ibdata1' and two InnoDB log files `ib_logfile0' and `ib_logfile1' to the datadir of MySQL (typically `/mysql/data'). Also the small archived InnoDB log file `ib_arch_log_0000000000' ends up in the datadir.

[mysqld]
# You can write your other MySQL server options here
# ...
#                                  Datafile(s) must be able to
#                                  hold your data and indexes.
#                                  Make sure you have enough
#                                  free disk space.
innodb_data_file_path = ibdata1:10M:autoextend
#                                  Set buffer pool size to
#                                  50 - 80 % of your computer's
#                                  memory
set-variable = innodb_buffer_pool_size=70M
set-variable = innodb_additional_mem_pool_size=10M
#                                  Set the log file size to about
#                                  25 % of the buffer pool size
set-variable = innodb_log_file_size=20M
set-variable = innodb_log_buffer_size=8M
#                                  Set ..flush_log_at_trx_commit
#                                  to 0 if you can afford losing
#                                  some last transactions 
innodb_flush_log_at_trx_commit=1

Check that the MySQL server has the rights to create files in datadir.

Note that datafiles must be < 2 GB in some file systems! The combined size of the log files must be < 4 GB. The combined size of datafiles must be >= 10 MB.

When you for the first time create an InnoDB database, it is best that you start the MySQL server from the command prompt. Then InnoDB will print the information about the database creation to the screen, and you see what is happening. See below next section what the printout should look like. For example, in Windows you can start `mysqld-max.exe' with:

your-path-to-mysqld\mysqld-max --console

Where to put `my.cnf' or `my.ini' in Windows? The rules for Windows are the following:

Where to specify options in Unix? On Unix `mysqld' reads options from the following files, if they exist, in the following order:

`COMPILATION_DATADIR' is the MySQL data directory which was specified as a ./configure option when `mysqld' was compiled (typically `/usr/local/mysql/data' for a binary installation or `/usr/local/var' for a source installation).

If you are not sure from where `mysqld' reads its `my.cnf' or `my.ini', you can give the path as the first command-line option to the server: mysqld --defaults-file=your_path_to_my_cnf.

InnoDB forms the directory path to a datafile by textually catenating innodb_data_home_dir to a datafile name or path in innodb_data_file_path, adding a possible slash or backslash in between if needed. If the keyword innodb_data_home_dir is not mentioned in `my.cnf' at all, the default for it is the 'dot' directory `./' which means the datadir of MySQL.

An advanced `my.cnf' example. Suppose you have a Linux computer with 2 GB RAM and three 60 GB hard disks (at directory paths `/', `/dr2' and `/dr3'). Below is an example of possible configuration parameters in `my.cnf' for InnoDB.

Note that InnoDB does not create directories: you have to create them yourself. Use the Unix or MS-DOS mkdir command to create the data and log group home directories.

[mysqld]
# You can write your other MySQL server options here
# ...
innodb_data_home_dir =
#                                  Datafiles must be able to
#                                  hold your data and indexes
innodb_data_file_path = /ibdata/ibdata1:2000M;/dr2/ibdata/ibdata2:2000M:autoextend
#                                  Set buffer pool size to
#                                  50 - 80 % of your computer's
#                                  memory, but make sure on Linux
#                                  x86 total memory usage is
#                                  < 2 GB
set-variable = innodb_buffer_pool_size=1G
set-variable = innodb_additional_mem_pool_size=20M
innodb_log_group_home_dir = /dr3/iblogs
#                                  .._log_arch_dir must be the same
#                                  as .._log_group_home_dir
innodb_log_arch_dir = /dr3/iblogs
set-variable = innodb_log_files_in_group=3
#                                  Set the log file size to about
#                                  15 % of the buffer pool size
set-variable = innodb_log_file_size=150M
set-variable = innodb_log_buffer_size=8M
#                                  Set ..flush_log_at_trx_commit to
#                                  0 if you can afford losing
#                                  some last transactions 
innodb_flush_log_at_trx_commit=1
set-variable = innodb_lock_wait_timeout=50
#innodb_flush_method=fdatasync
#set-variable = innodb_thread_concurrency=5

Note that we have placed the two datafiles on different disks. InnoDB will fill the tablespace formed by the datafiles from bottom up. In some cases it will improve the performance of the database if all data is not placed on the same physical disk. Putting log files on a different disk from data is very often beneficial for performance. You can also use raw disk partitions (raw devices) as datafiles. In some Unixes they speed up I/O. See the manual section on InnoDB file space management about how to specify them in `my.cnf'.

Warning: on Linux x86 you must be careful you do not set memory usage too high. glibc will allow the process heap to grow over thread stacks, which will crash your server. It is a risk if the value of

innodb_buffer_pool_size + key_buffer +
max_connections * (sort_buffer + read_buffer_size) + max_connections * 2 MB

is close to 2 GB or exceeds 2 GB. Each thread will use a stack (often 2 MB, but in MySQL AB binaries only 256 KB) and in the worst case also sort_buffer + read_buffer_size additional memory.

How to tune other `mysqld' server parameters? Typical values which suit most users are:

skip-locking
set-variable = max_connections=200
set-variable = read_buffer_size=1M
set-variable = sort_buffer=1M
#                                  Set key_buffer to 5 - 50%
#                                  of your RAM depending on how
#                                  much you use MyISAM tables, but
#                                  keep key_buffer + InnoDB
#                                  buffer pool size < 80% of
#                                  your RAM
set-variable = key_buffer=...

Note that some parameters are given using the numeric `my.cnf' parameter format: set-variable = innodb... = 123, others (string and boolean parameters) with another format: innodb_... = ... .

The meanings of the configuration parameters are the following:

Option Description
innodb_data_home_dir The common part of the directory path for all InnoDB datafiles. If you do not mentioned this option in `my.cnf' the default is the datadir of MySQL. You can specify this also as an empty string, in which case you can use absolute file paths in innodb_data_file_path.
innodb_data_file_path Paths to individual datafiles and their sizes. The full directory path to each datafile is acquired by concatenating innodb_data_home_dir to the paths specified here. The file sizes are specified in megabytes, hence the 'M' after the size specification above. InnoDB also understands the abbreviation 'G', 1 G meaning 1024 MB. Starting from 3.23.44 you can set the file-size bigger than 4 GB on those operating systems which support big files. On some operating systems files must be < 2 GB. If you do not specify innodb_data_file_path, the default behavior starting from 4.0 is to create a 10 MB auto-extending datafile `ibdata1'. The sum of the sizes of the files must be at least 10 MB.
innodb_mirrored_log_groups Number of identical copies of log groups we keep for the database. Currently this should be set to 1.
innodb_log_group_home_dir Directory path to InnoDB log files. If you do not mentioned this option in `my.cnf' the default is the datadir of MySQL.
innodb_log_files_in_group Number of log files in the log group. InnoDB writes to the files in a circular fashion. Value 2 is recommended here. The default is 2.
innodb_log_file_size Size of each log file in a log group in megabytes. Sensible values range from 1M to 1/nth of the size of the buffer pool specified below, where n is the number of log files in the group. The bigger the value, the less checkpoint flush activity is needed in the buffer pool, saving disk I/O. But bigger log files also mean that recovery will be slower in case of a crash. The combined size of log files must be < 4 GB on 32-bit computers. The default is 5M.
innodb_log_buffer_size The size of the buffer which InnoDB uses to write log to the log files on disk. Sensible values range from 1M to 8M. A big log buffer allows large transactions to run without a need to write the log to disk until the transaction commit. Thus, if you have big transactions, making the log buffer big will save disk I/O.
innodb_flush_log_at_trx_commit Normally you set this to 1, meaning that at a transaction commit the log is flushed to disk, and the modifications made by the transaction become permanent, and survive a database crash. If you are willing to compromise this safety, and you are running small transactions, you may set this to 0 or 2 to reduce disk I/O to the logs. Value 0 means that the log is only written to the log file and the log file flushed to disk approximately once per second. Value 2 means the log is written to the log file at each commit, but the log file is only flushed to disk approximately once per second. The default value is 1 starting from MySQL-4.0.13, previously it was 0.
innodb_log_arch_dir The directory where fully written log files would be archived if we used log archiving. The value of this parameter should currently be set the same as innodb_log_group_home_dir.
innodb_log_archive This value should currently be set to 0. As recovery from a backup is done by MySQL using its own log files, there is currently no need to archive InnoDB log files.
innodb_buffer_pool_size The size of the memory buffer InnoDB uses to cache data and indexes of its tables. The bigger you set this the less disk I/O is needed to access data in tables. On a dedicated database server you may set this parameter up to 80% of the machine physical memory size. Do not set it too large, though, because competition of the physical memory may cause paging in the operating system.
innodb_buffer_pool_awe_mem_mb Size of the buffer pool in MB, if it is placed in the AWE memory of 32-bit Windows. Available starting from 4.1.0 and only relevant in 32-bit Windows. If your 32-bit Windows operating system supports > 4 GB memory, so-called Address Windowing Extensions, you can allocate the InnoDB buffer pool into the AWE physical memory using this parameter. The maximum possible value for this is 64000. If this parameter is specified, then innodb_buffer_pool_size is the window in the 32-bit address space of mysqld where InnoDB maps that AWE memory. A good value for innodb_buffer_pool_size is then 500M.
innodb_additional_mem_pool_size Size of a memory pool InnoDB uses to store data dictionary information and other internal data structures. A sensible value for this might be 2M, but the more tables you have in your application the more you will need to allocate here. If InnoDB runs out of memory in this pool, it will start to allocate memory from the operating system, and write warning messages to the MySQL error log.
innodb_file_io_threads Number of file I/O threads in InnoDB. Normally, this should be 4, but on Windows disk I/O may benefit from a larger number.
innodb_lock_wait_timeout Timeout in seconds an InnoDB transaction may wait for a lock before being rolled back. InnoDB automatically detects transaction deadlocks in its own lock table and rolls back the transaction. If you use the LOCK TABLES command, or other transaction-safe storage engines than InnoDB in the same transaction, then a deadlock may arise which InnoDB cannot notice. In cases like this the timeout is useful to resolve the situation.
innodb_flush_method (Available from 3.23.40 up.) The default value for this is fdatasync. Another option is O_DSYNC.
innodb_force_recovery Warning: this option should only be defined in an emergency situation when you want to dump your tables from a corrupt database! Possible values are 1 - 6. See below at section 'Forcing recovery' about the meanings of the values. As a safety measure InnoDB prevents a user from modifying data when this option is > 0. This option is available starting from version 3.23.44.

7.5.4 Creating InnoDB Tablespace

Suppose you have installed MySQL and have edited `my.cnf' so that it contains the necessary InnoDB configuration parameters. Before starting MySQL you should check that the directories you have specified for InnoDB datafiles and log files exist and that you have access rights to those directories. InnoDB cannot create directories, only files. Check also you have enough disk space for the data and log files.

When you now start MySQL, InnoDB will start creating your datafiles and log files. InnoDB will print something like the following:

~/mysqlm/sql > mysqld
InnoDB: The first specified datafile /home/heikki/data/ibdata1
did not exist:
InnoDB: a new database to be created!
InnoDB: Setting file /home/heikki/data/ibdata1 size to 134217728
InnoDB: Database physically writes the file full: wait...
InnoDB: datafile /home/heikki/data/ibdata2 did not exist:
new to be created
InnoDB: Setting file /home/heikki/data/ibdata2 size to 262144000
InnoDB: Database physically writes the file full: wait...
InnoDB: Log file /home/heikki/data/logs/ib_logfile0 did not exist:
new to be created
InnoDB: Setting log file /home/heikki/data/logs/ib_logfile0 size to 5242880
InnoDB: Log file /home/heikki/data/logs/ib_logfile1 did not exist:
new to be created
InnoDB: Setting log file /home/heikki/data/logs/ib_logfile1 size to 5242880
InnoDB: Log file /home/heikki/data/logs/ib_logfile2 did not exist:
new to be created
InnoDB: Setting log file /home/heikki/data/logs/ib_logfile2 size to 5242880
InnoDB: Started
mysqld: ready for connections

A new InnoDB database has now been created. You can connect to the MySQL server with the usual MySQL client programs like mysql. When you shut down the MySQL server with `mysqladmin shutdown', InnoDB output will be like the following:

010321 18:33:34  mysqld: Normal shutdown
010321 18:33:34  mysqld: Shutdown Complete
InnoDB: Starting shutdown...
InnoDB: Shutdown completed

You can now look at the datafiles and logs directories and you will see the files created. The log directory will also contain a small file named `ib_arch_log_0000000000'. That file resulted from the database creation, after which InnoDB switched off log archiving. When MySQL is again started, the output will be like the following:

~/mysqlm/sql > mysqld
InnoDB: Started
mysqld: ready for connections

7.5.4.1 If Something Goes Wrong in Database Creation

If InnoDB prints an operating system error in a file operation, usually the problem is one of the following:

If something goes wrong in an InnoDB database creation, you should delete all files created by InnoDB. This means all datafiles, all log files, the small archived log file, and in the case you already did create some InnoDB tables, delete also the corresponding `.frm' files for these tables from the MySQL database directories. Then you can try the InnoDB database creation again.

7.5.5 Creating InnoDB Tables

Suppose you have started the MySQL client with the command mysql test. To create a table in the InnoDB format you must specify TYPE = InnoDB in the table creation SQL command:

CREATE TABLE CUSTOMER (A INT, B CHAR (20), INDEX (A)) TYPE = InnoDB;

This SQL command will create a table and an index on column A into the InnoDB tablespace consisting of the datafiles you specified in `my.cnf'. In addition MySQL will create a file `CUSTOMER.frm' to the MySQL database directory `test'. Internally, InnoDB will add to its own data dictionary an entry for table 'test/CUSTOMER'. Thus you can create a table of the same name CUSTOMER in another database of MySQL, and the table names will not collide inside InnoDB.

You can query the amount of free space in the InnoDB tablespace by issuing the table status command of MySQL for any table you have created with TYPE = InnoDB. Then the amount of free space in the tablespace appears in the table comment section in the output of SHOW. An example:

SHOW TABLE STATUS FROM test LIKE 'CUSTOMER'

Note that the statistics SHOW gives about InnoDB tables are only approximate: they are used in SQL optimisation. Table and index reserved sizes in bytes are accurate, though.

7.5.5.1 Converting MyISAM Tables to InnoDB

InnoDB does not have a special optimisation for separate index creation. Therefore it does not pay to export and import the table and create indexes afterwards. The fastest way to alter a table to InnoDB is to do the inserts directly to an InnoDB table, that is, use ALTER TABLE ... TYPE=INNODB, or create an empty InnoDB table with identical definitions and insert the rows with INSERT INTO ... SELECT * FROM ....

To get better control over the insertion process, it may be good to insert big tables in pieces:

INSERT INTO newtable SELECT * FROM oldtable
   WHERE yourkey > something AND yourkey <= somethingelse;

After all data has been inserted you can rename the tables.

During the conversion of big tables you should set the InnoDB buffer pool size big to reduce disk I/O. Not bigger than 80% of the physical memory, though. You should set InnoDB log files big, and also the log buffer large.

Make sure you do not run out of tablespace: InnoDB tables take a lot more space than MyISAM tables. If an ALTER TABLE runs out of space, it will start a rollback, and that can take hours if it is disk-bound. In inserts InnoDB uses the insert buffer to merge secondary index records to indexes in batches. That saves a lot of disk I/O. In rollback no such mechanism is used, and the rollback can take 30 times longer than the insertion.

In the case of a runaway rollback, if you do not have valuable data in your database, it is better that you kill the database process and delete all InnoDB datafiles and log files and all InnoDB table `.frm' files, and start your job again, rather than wait for millions of disk I/Os to complete.

7.5.5.2 FOREIGN KEY Constraints

Starting from version 3.23.43b InnoDB features foreign key constraints. InnoDB is the first MySQL table type which allows you to define foreign key constraints to guard the integrity of your data.

The syntax of a foreign key constraint definition in InnoDB:

[CONSTRAINT symbol] FOREIGN KEY (index_col_name, ...)
                  REFERENCES table_name (index_col_name, ...)
                  [ON DELETE {CASCADE | SET NULL | NO ACTION
                              | RESTRICT}]
                  [ON UPDATE {CASCADE | SET NULL | NO ACTION
                              | RESTRICT}]

Both tables have to be InnoDB type, in the table there must be an INDEX where the foreign key columns are listed as the FIRST columns in the same order, and in the referenced table there must be an INDEX where the referenced columns are listed as the FIRST columns in the same order. InnoDB does not auto-create indexes on foreign keys or referenced keys: you have to create them explicitly. The indexes are needed for foreign key checks to be fast and not require a table scan.

Corresponding columns in the foreign key and the referenced key must have similar internal datatypes inside InnoDB so that they can be compared without a type conversion. The size and the signedness of integer types has to be the same. The length of string types need not be the same. If you specify a SET NULL action, make sure you have not declared the columns in the child table NOT NULL.

If MySQL gives the error number 1005 from a CREATE TABLE statement, and the error message string refers to errno 150, then the table creation failed because a foreign key constraint was not correctly formed. Similarly, if an ALTER TABLE fails and it refers to errno 150, that means a foreign key definition would be incorrectly formed for the altered table. Starting from version 4.0.13, you can use SHOW INNODB STATUS to look at a detailed explanation of the latest InnoDB foreign key error in the server.

Starting from version 3.23.50, InnoDB does not check foreign key constraints on those foreign key or referenced key values which contain a NULL column.

A deviation from SQL standards: if in the parent table there are several rows which have the same referenced key value, then InnoDB acts in foreign key checks like the other parent rows with the same key value would not exist. For example, if you have defined a RESTRICT type constraint, and there is a child row with several parent rows, InnoDB does not allow the deletion of any of those parent rows.

Starting from version 3.23.50, you can also associate the ON DELETE CASCADE or ON DELETE SET NULL clause with the foreign key constraint. Corresponding ON UPDATE options are available starting from 4.0.8. If ON DELETE CASCADE is specified, and a row in the parent table is deleted, then InnoDB automatically deletes also all those rows in the child table whose foreign key values are equal to the referenced key value in the parent row. If ON DELETE SET NULL is specified, the child rows are automatically updated so that the columns in the foreign key are set to the SQL NULL value.

A deviation from SQL standards: if ON UPDATE CASCADE or ON UPDATE SET NULL recurses to update the SAME TABLE it has already updated during the cascade, it acts like RESTRICT. This is to prevent infinite loops resulting from cascaded updates. A self-referential ON DELETE SET NULL, on the other hand, works starting from 4.0.13. A self-referential ON DELETE CASCADE has always worked.

An example:

CREATE TABLE parent(id INT NOT NULL, PRIMARY KEY (id)) TYPE=INNODB;
CREATE TABLE child(id INT, parent_id INT, INDEX par_ind (parent_id),
             FOREIGN KEY (parent_id) REFERENCES parent(id)
             ON DELETE SET NULL
) TYPE=INNODB;

A complex example:

CREATE TABLE product (category INT NOT NULL, id INT NOT NULL,
                      price DECIMAL,
                      PRIMARY KEY(category, id)) TYPE=INNODB;
CREATE TABLE customer (id INT NOT NULL,
                      PRIMARY KEY (id)) TYPE=INNODB;
CREATE TABLE product_order (no INT NOT NULL AUTO_INCREMENT,
                      product_category INT NOT NULL,
                      product_id INT NOT NULL,
                      customer_id INT NOT NULL,
                      PRIMARY KEY(no),
                      INDEX (product_category, product_id),
                      FOREIGN KEY (product_category, product_id)
                        REFERENCES product(category, id)
                        ON UPDATE CASCADE ON DELETE RESTRICT,
                      INDEX (customer_id),
                      FOREIGN KEY (customer_id)
                        REFERENCES customer(id)) TYPE=INNODB;

Starting from version 3.23.50, InnoDB allows you to add a new foreign key constraint to a table through

ALTER TABLE yourtablename
ADD [CONSTRAINT symbol] FOREIGN KEY (...) REFERENCES anothertablename(...)
[on_delete_and_on_update_actions]

Remember to create the required indexes first, though.

Starting from version 4.0.13, InnoDB supports

ALTER TABLE yourtablename DROP FOREIGN KEY internally_generated_foreign_key_id

You have to use SHOW CREATE TABLE to determine the internally generated foreign key id when you want to drop a foreign key. In InnoDB versions < 3.23.50 ALTER TABLE or CREATE INDEX should not be used in connection with tables which have foreign key constraints or which are referenced in foreign key constraints: Any ALTER TABLE removes all foreign key constraints defined for the table. You should not use ALTER TABLE to the referenced table either, but use DROP TABLE and CREATE TABLE to modify the schema. When MySQL does an ALTER TABLE it may internally use RENAME TABLE, and that will confuse the foreign key costraints which refer to the table. A CREATE INDEX statement is in MySQL processed as an ALTER TABLE, and these restrictions apply also to it.

When doing foreign key checks, InnoDB sets shared row level locks on child or parent records it has to look at. InnoDB checks foreign key constraints immediately: the check is not deferred to transaction commit.

If you want to ignore foreign key constraints during, for example for a LOAD DATA operation, you can do SET FOREIGN_KEY_CHECKS=0.

InnoDB allows you to drop any table even though that would break the foreign key constraints which reference the table. When you drop a table the constraints which were defined in its create statement are also dropped.

If you re-create a table which was dropped, it has to have a definition which conforms to the foreign key constraints referencing it. It must have the right column names and types, and it must have indexes on the referenced keys, as stated above. If these are not satisfied, MySQL returns error number 1005 and refers to errno 150 in the error message string.

Starting from version 3.23.50 InnoDB returns the foreign key definitions of a table when you call

SHOW CREATE TABLE yourtablename

Then also `mysqldump' produces correct definitions of tables to the dump file, and does not forget about the foreign keys.

You can also list the foreign key constraints for a table T with

SHOW TABLE STATUS FROM yourdatabasename LIKE 'T'

The foreign key constraints are listed in the table comment of the output.

7.5.6 Adding and Removing InnoDB Data and Log Files

From version 3.23.50 and 4.0.2 you can specify the last InnoDB datafile to autoextend. Alternatively, you can increase to your tablespace by specifying an additional datafile. To do this you have to shut down the MySQL server, edit the `my.cnf' file adding a new datafile to innodb_data_file_path, and then start the MySQL server again.

Currently you cannot remove a datafile from InnoDB. To decrease the size of your database you have to use `mysqldump' to dump all your tables, create a new database, and import your tables to the new database.

If you want to change the number or the size of your InnoDB log files, you have to shut down MySQL and make sure that it shuts down without errors. Then copy the old log files into a safe place just in case something went wrong in the shutdown and you will need them to recover the database. Delete then the old log files from the log file directory, edit `my.cnf', and start MySQL again. InnoDB will tell you at the startup that it is creating new log files.

7.5.7 Backing up and Recovering an InnoDB Database

The key to safe database management is taking regular backups.

InnoDB Hot Backup is an online backup tool you can use to backup your InnoDB database while it is running. InnoDB Hot Backup does not require you to shut down your database and it does not set any locks or disturb your normal database processing. InnoDB Hot Backup is a non-free additional tool which is not included in the standard MySQL distribution. See the InnoDB Hot Backup homepage http://www.innodb.com/hotbackup.html for detailed information and screenshots.

If you are able to shut down your MySQL server, then to take a 'binary' backup of your database you have to do the following:

In addition to taking the binary backups described above, you should also regularly take dumps of your tables with `mysqldump'. The reason to this is that a binary file may be corrupted without you noticing it. Dumped tables are stored into text files which are human-readable and much simpler than database binary files. Seeing table corruption from dumped files is easier, and since their format is simpler, the chance for serious data corruption in them is smaller.

A good idea is to take the dumps at the same time you take a binary backup of your database. You have to shut out all clients from your database to get a consistent snapshot of all your tables into your dumps. Then you can take the binary backup, and you will then have a consistent snapshot of your database in two formats.

To be able to recover your InnoDB database to the present from the binary backup described above, you have to run your MySQL database with the general logging and log archiving of MySQL switched on. Here by the general logging we mean the logging mechanism of the MySQL server which is independent of InnoDB logs.

To recover from a crash of your MySQL server process, the only thing you have to do is to restart it. InnoDB will automatically check the logs and perform a roll-forward of the database to the present. InnoDB will automatically roll back uncommitted transactions which were present at the time of the crash. During recovery, InnoDB will print out something like the following:

~/mysqlm/sql > mysqld
InnoDB: Database was not shut down normally.
InnoDB: Starting recovery from log files...
InnoDB: Starting log scan based on checkpoint at
InnoDB: log sequence number 0 13674004
InnoDB: Doing recovery: scanned up to log sequence number 0 13739520
InnoDB: Doing recovery: scanned up to log sequence number 0 13805056
InnoDB: Doing recovery: scanned up to log sequence number 0 13870592
InnoDB: Doing recovery: scanned up to log sequence number 0 13936128
...
InnoDB: Doing recovery: scanned up to log sequence number 0 20555264
InnoDB: Doing recovery: scanned up to log sequence number 0 20620800
InnoDB: Doing recovery: scanned up to log sequence number 0 20664692
InnoDB: 1 uncommitted transaction(s) which must be rolled back
InnoDB: Starting rollback of uncommitted transactions
InnoDB: Rolling back trx no 16745
InnoDB: Rolling back of trx no 16745 completed
InnoDB: Rollback of uncommitted transactions completed
InnoDB: Starting an apply batch of log records to the database...
InnoDB: Apply batch completed
InnoDB: Started
mysqld: ready for connections

If your database gets corrupted or your disk fails, you have to do the recovery from a backup. In the case of corruption, you should first find a backup which is not corrupted. From a backup do the recovery from the general log files of MySQL according to instructions in the MySQL manual.

7.5.7.1 Forcing recovery

If there is database page corruption, you may want to dump your tables from the database with SELECT INTO OUTFILE, and usually most of the data is intact and correct. But the corruption may cause SELECT * FROM table, or InnoDB background operations to crash or assert, or even the InnoDB roll-forward recovery to crash. Starting from the InnoDB version 3.23.44, there is a `my.cnf' option with which you can force InnoDB to start up, and you can also prevent background operations from running, so that you will be able to dump your tables. For example, you can set

set-variable = innodb_force_recovery = 4

in `my.cnf'.

The alternatives for innodb_force_recovery are listed below. The database must not otherwise be used with these options! As a safety measure InnoDB prevents a user from doing INSERT, UPDATE, or DELETE when this option is > 0.

Starting from version 3.23.53 and 4.0.4, you are allowed to DROP or CREATE a table even if forced recovery is used. If you know that a certain table is causing a crash in rollback, you can drop it. You can use this also to stop a runaway rollback caused by a failing mass import or ALTER TABLE. You can kill the mysqld process and use the `my.cnf' option innodb_force_recovery=3 to bring your database up without the rollback. Then DROP the table which is causing the runaway rollback.

A bigger number below means that all precautions of lower numbers are included. If you are able to dump your tables with an option at most 4, then you are relatively safe that only some data on corrupt individual pages is lost. Option 6 is more dramatic, because database pages are left in an obsolete state, which in turn may introduce more corruption into B-trees and other database structures.

7.5.7.2 Checkpoints

InnoDB implements a checkpoint mechanism called a fuzzy checkpoint. InnoDB will flush modified database pages from the buffer pool in small batches, there is no need to flush the buffer pool in one single batch, which would in practice stop processing of user SQL statements for a while.

In crash recovery InnoDB looks for a checkpoint label written to the log files. It knows that all modifications to the database before the label are already present on the disk image of the database. Then InnoDB scans the log files forward from the place of the checkpoint applying the logged modifications to the database.

InnoDB writes to the log files in a circular fashion. All committed modifications which make the database pages in the buffer pool different from the images on disk must be available in the log files in case InnoDB has to do a recovery. This means that when InnoDB starts to reuse a log file in the circular fashion, it has to make sure that the database page images on disk already contain the modifications logged in the log file InnoDB is going to reuse. In other words, InnoDB has to make a checkpoint and often this involves flushing of modified database pages to disk.

The above explains why making your log files very big may save disk I/O in checkpointing. It can make sense to set the total size of the log files as big as the buffer pool or even bigger. The drawback in big log files is that crash recovery can last longer because there will be more log to apply to the database.

7.5.8 Moving an InnoDB Database to Another Machine

On Windows InnoDB stores the database names and table names internally always in lower case. To move databases in a binary format from Unix to Windows or from Windows to Unix you should have all table and database names in lower case. A convenient way to accomplish this is to add on Unix the line

set-variable=lower_case_table_names=1

to the [mysqld] section of your `my.cnf' before you start creating your tables. On Windows the setting 1 is the default.

InnoDB data and log files are binary-compatible on all platforms if the floating-point number format on the machines is the same. You can move an InnoDB database simply by copying all the relevant files, which we already listed in the previous section on backing up a database. If the floating-point formats on the machines are different but you have not used FLOAT or DOUBLE datatypes in your tables then the procedure is the same: just copy the relevant files. If the formats are different and your tables contain floating-point data, you have to use `mysqldump' and `mysqlimport' to move those tables.

A performance tip is to switch off auto-commit mode when you import data into your database, assuming your tablespace has enough space for the big rollback segment the big import transaction will generate. Do the commit only after importing a whole table or a segment of a table.

7.5.9 InnoDB Transaction Model and Locking

In the InnoDB transaction model the goal has been to combine the best properties of a multi-versioning database to traditional two-phase locking. InnoDB does locking on row level and runs queries by default as non-locking consistent reads, in the style of Oracle. The lock table in InnoDB is stored so space-efficiently that lock escalation is not needed: typically several users are allowed to lock every row in the database, or any random subset of the rows, without InnoDB running out of memory.

In InnoDB all user activity happens inside transactions. If the autocommit mode is used in MySQL, then each SQL statement forms a single transaction. MySQL always starts a new connection with the autocommit mode switched on.

If the autocommit mode is switched off with SET AUTOCOMMIT = 0, then we can think that a user always has a transaction open. If he issues the SQL COMMIT or ROLLBACK statement, it ends the current transaction, and a new one starts. Both statements will release all InnoDB locks that were set during the current transaction. A COMMIT means that the changes made in the current transaction are made permanent and become visible to other users. A ROLLBACK statement, on the other hand, cancels all modifications made by the current transaction.

If the connection has AUTOCOMMIT = 1, then the user can still perform a multi-statement transaction by starting it with START TRANSACTION or BEGIN and ending it with COMMIT or ROLLBACK.

7.5.9.1 InnoDB and SET ... TRANSACTION ISOLATION LEVEL ...

In terms of the SQL-92 transaction isolation levels, the InnoDB default is REPEATABLE READ. Starting from version 4.0.5, InnoDB offers all 4 different transaction isolation levels described by the SQL-92 standard. You can set the default isolation level for all connections in the [mysqld] section of `my.cnf':

transaction-isolation = {READ-UNCOMMITTED | READ-COMMITTED
                         | REPEATABLE-READ | SERIALIZABLE}

A user can change the isolation level of a single session or all new incoming connections with the

SET [SESSION | GLOBAL] TRANSACTION ISOLATION LEVEL
                       {READ UNCOMMITTED | READ COMMITTED
                        | REPEATABLE READ | SERIALIZABLE}

SQL statement. Note that there are no hyphens in level names in the SQL syntax. If you specify the keyword GLOBAL in the above statement, it will determine the initial isolation level of new incoming connections, but will not change the isolation level of old connections. Any user is free to change the isolation level of his session, even in the middle of a transaction. In versions earlier than 3.23.50, SET TRANSACTION had no effect on InnoDB tables. In versions < 4.0.5 only REPEATABLE READ and SERIALIZABLE were available.

You can query the global and session transaction isolation levels with:

SELECT @@global.tx_isolation;
SELECT @@tx_isolation;

In row level locking InnoDB uses so-called next-key locking. That means that besides index records, InnoDB can also lock the ``gap'' before an index record to block insertions by other users immediately before the index record. A next-key lock means a lock which locks an index record and the gap before it. A gap lock means a lock which only locks a gap before some index record.

A detailed description of each isolation level in InnoDB:

7.5.9.2 Consistent Non-Locking Read

A consistent read means that InnoDB uses its multi-versioning to present to a query a snapshot of the database at a point in time. The query will see the changes made by exactly those transactions that committed before that point of time, and no changes made by later or uncommitted transactions. The exception to this rule is that the query will see the changes made by the transaction itself which issues the query.

If you are running with the default REPEATABLE READ isolation level, then all consistent reads within the same transaction read the snapshot established by the first such read in that transaction. You can get a fresher snapshot for your queries by committing the current transaction and after that issuing new queries.

Consistent read is the default mode in which InnoDB processes SELECT statements in READ COMMITTED and REPEATABLE READ isolation levels. A consistent read does not set any locks on the tables it accesses, and therefore other users are free to modify those tables at the same time a consistent read is being performed on the table.

7.5.9.3 Locking Reads SELECT ... FOR UPDATE and SELECT ... LOCK IN SHARE MODE

A consistent read is not convenient in some circumstances. Suppose you want to add a new row into your table CHILD, and make sure that the child already has a parent in table PARENT.

Suppose you use a consistent read to read the table PARENT and indeed see the parent of the child in the table. Can you now safely add the child row to table CHILD? No, because it may happen that meanwhile some other user has deleted the parent row from the table PARENT, and you are not aware of that.

The solution is to perform the SELECT in a locking mode, LOCK IN SHARE MODE.

SELECT * FROM PARENT WHERE NAME = 'Jones' LOCK IN SHARE MODE;

Performing a read in share mode means that we read the latest available data, and set a shared mode lock on the rows we read. If the latest data belongs to a yet uncommitted transaction of another user, we will wait until that transaction commits. A shared mode lock prevents others from updating or deleting the row we have read. After we see that the above query returns the parent 'Jones', we can safely add his child to table CHILD, and commit our transaction. This example shows how to implement referential integrity in your application code.

Let us look at another example: we have an integer counter field in a table CHILD_CODES which we use to assign a unique identifier to each child we add to table CHILD. Obviously, using a consistent read or a shared mode read to read the present value of the counter is not a good idea, since then two users of the database may see the same value for the counter, and we will get a duplicate key error when we add the two children with the same identifier to the table.

In this case there are two good ways to implement the reading and incrementing of the counter: (1) update the counter first by incrementing it by 1 and only after that read it, or (2) read the counter first with a lock mode FOR UPDATE, and increment after that:

SELECT COUNTER_FIELD FROM CHILD_CODES FOR UPDATE;
UPDATE CHILD_CODES SET COUNTER_FIELD = COUNTER_FIELD + 1;

A SELECT ... FOR UPDATE will read the latest available data setting exclusive locks on each row it reads. Thus it sets the same locks a searched SQL UPDATE would set on the rows.

7.5.9.4 Next-key Locking: Avoiding the Phantom Problem

In row level locking InnoDB uses an algorithm called next-key locking. InnoDB does the row level locking so that when it searches or scans an index of a table, it sets shared or exclusive locks on the index records it encounters. Thus the row level locks are more precisely called index record locks.

The locks InnoDB sets on index records also affect the 'gap' before that index record. If a user has a shared or exclusive lock on record R in an index, then another user cannot insert a new index record immediately before R in the index order. This locking of gaps is done to prevent the so-called phantom problem. Suppose I want to read and lock all children with identifier bigger than 100 from table CHILD, and update some field in the selected rows.

SELECT * FROM CHILD WHERE ID > 100 FOR UPDATE;

Suppose there is an index on table CHILD on column ID. Our query will scan that index starting from the first record where ID is bigger than 100. Now, if the locks set on the index records would not lock out inserts made in the gaps, a new child might meanwhile be inserted to the table. If now I in my transaction execute

SELECT * FROM CHILD WHERE ID > 100 FOR UPDATE;

again, I will see a new child in the result set the query returns. This is against the isolation principle of transactions: a transaction should be able to run so that the data it has read does not change during the transaction. If we regard a set of rows as a data item, then the new 'phantom' child would break this isolation principle.

When InnoDB scans an index it can also lock the gap after the last record in the index. Just that happens in the previous example: the locks set by InnoDB will prevent any insert to the table where ID would be bigger than 100.

You can use next-key locking to implement a uniqueness check in your application: if you read your data in share mode and do not see a duplicate for a row you are going to insert, then you can safely insert your row and know that the next-key lock set on the successor of your row during the read will prevent anyone meanwhile inserting a duplicate for your row. Thus the next-key locking allows you to 'lock' the non-existence of something in your table.

7.5.9.5 Locks Set by Different SQL Statements in InnoDB

7.5.9.6 Deadlock Detection and Rollback

InnoDB automatically detects a deadlock of transactions and rolls back a transaction or transactions to prevent the deadlock. Starting from version 4.0.5, InnoDB will try to pick small transactions to roll back. The size of a transaction is determined by the number of rows it has inserted, updated, or deleted. Previous to 4.0.5, InnoDB always rolled back the transaction whose lock request was the last one to build a deadlock, that is, a cycle in the waits-for graph of transactions.

InnoDB cannot detect deadlocks where a lock set by a MySQL LOCK TABLES statement is involved, or if a lock set in another storage engine than InnoDB is involved. You have to resolve these situations using innodb_lock_wait_timeout set in `my.cnf'.

When InnoDB performs a complete rollback of a transaction, all the locks of the transaction are released. However, if just a single SQL statement is rolled back as a result of an error, some of the locks set by the SQL statement may be preserved. This is because InnoDB stores row locks in a format where it cannot afterwards know which was set by which SQL statement.

7.5.9.7 An Example of How the Consistent Read Works in InnoDB

Suppose you are running on the default REPEATABLE READ isolation level. When you issue a consistent read, that is, an ordinary SELECT statement, InnoDB will give your transaction a timepoint according to which your query sees the database. Thus, if transaction B deletes a row and commits after your timepoint was assigned, then you will not see the row deleted. Similarly with inserts and updates.

You can advance your timepoint by committing your transaction and then doing another SELECT.

This is called multi-versioned concurrency control.

                  User A                 User B

              SET AUTOCOMMIT=0;      SET AUTOCOMMIT=0;
time
|             SELECT * FROM t;
|             empty set
|                                    INSERT INTO t VALUES (1, 2);
|
v             SELECT * FROM t;
              empty set
                                     COMMIT;

              SELECT * FROM t;
              empty set;

              COMMIT;

              SELECT * FROM t;
              ---------------------
              |    1    |    2    |
              ---------------------

Thus user A sees the row inserted by B only when B has committed the insert, and A has committed his own transaction so that the timepoint is advanced past the commit of B.

If you want to see the ``freshest'' state of the database, you should use a locking read:

SELECT * FROM t LOCK IN SHARE MODE;

7.5.9.8 How to cope with deadlocks?

Deadlocks are a classic problem in transactional databases, but they are not dangerous, unless they are so frequent that you cannot run certain transactions at all. Normally you have to write your applications so that they are always prepared to re-issue a transaction if it gets rolled back because of a deadlock.

InnoDB uses automatic row level locking. You can get deadlocks even in the case of transactions which just insert or delete a single row. That is because these operations are not really 'atomic': they automatically set locks on the (possibly several) index records of the row inserted/deleted.

You can cope with deadlocks and reduce the number of them with the following tricks:

7.5.10 Performance Tuning Tips

  1. If the Unix `top' or the Windows `Task Manager' shows that the CPU usage percentage with your workload is less than 70%, your workload is probably disk-bound. Maybe you are making too many transaction commits, or the buffer pool is too small. Making the buffer pool bigger can help, but do not set it bigger than 80% of physical memory.
  2. Wrap several modifications into one transaction. InnoDB must flush the log to disk at each transaction commit, if that transaction made modifications to the database. Since the rotation speed of a disk is typically at most 167 revolutions/second, that constrains the number of commits to the same 167/second if the disk does not fool the operating system.
  3. If you can afford the loss of some latest committed transactions, you can set the `my.cnf' parameter innodb_flush_log_at_trx_commit to 0. InnoDB tries to flush the log once per second anyway, though the flush is not guaranteed.
  4. Make your log files big, even as big as the buffer pool. When InnoDB has written the log files full, it has to write the modified contents of the buffer pool to disk in a checkpoint. Small log files will cause many unnecessary disk writes. The drawback in big log files is that recovery time will be longer.
  5. Also the log buffer should be quite big, say 8 MB.
  6. (Relevant from 3.23.39 up.) In some versions of Linux and Unix, flushing files to disk with the Unix fdatasync and other similar methods is surprisingly slow. The default method InnoDB uses is the fdatasync function. If you are not satisfied with the database write performance, you may try setting innodb_flush_method in `my.cnf' to O_DSYNC, though O_DSYNC seems to be slower on most systems.
  7. In importing data to InnoDB, make sure that MySQL does not have autocommit=1 on. Then every insert requires a log flush to disk. Put before your plain SQL import file line
    SET AUTOCOMMIT=0;
    
    and after it
    COMMIT;
    
    If you use the `mysqldump' option --opt, you will get dump files which are fast to import also to an InnoDB table, even without wrapping them to the above SET AUTOCOMMIT=0; ... COMMIT; wrappers.
  8. Beware of big rollbacks of mass inserts: InnoDB uses the insert buffer to save disk I/O in inserts, but in a corresponding rollback no such mechanism is used. A disk-bound rollback can take 30 times the time of the corresponding insert. Killing the database process will not help because the rollback will start again at the database startup. The only way to get rid of a runaway rollback is to increase the buffer pool so that the rollback becomes CPU-bound and runs fast, or delete the whole InnoDB database.
  9. Beware also of other big disk-bound operations. Use DROP TABLE or TRUNCATE (from MySQL-4.0 up) to empty a table, not DELETE FROM yourtable.
  10. Use the multi-line INSERT to reduce communication overhead between the client and the server if you need to insert many rows:
    INSERT INTO yourtable VALUES (1, 2), (5, 5);
    
    This tip is of course valid for inserts into any table type, not just InnoDB.

7.5.10.1 SHOW INNODB STATUS and the InnoDB Monitors

Starting from version 3.23.42, InnoDB includes InnoDB Monitors which print information on the InnoDB internal state. Starting from versions 3.23.52 and 4.0.3 you can use a new SQL command SHOW INNODB STATUS to fetch the output of the standard InnoDB Monitor to the SQL client. The data is useful in performance tuning. If you are using the `mysql' interactive SQL client, the output is more readable if you replace the usual semicolon at the SQL command end by \G:

SHOW INNODB STATUS\G

Another way to use InnoDB Monitors is to let them continuosly write data to the standard output of the server `mysqld' (note: the MySQL client will not print anything). When switched on, InnoDB Monitors print data about once every 15 seconds. If you run `mysqld' as a daemon then this output is usually directed to the `.err' log in the MySQL datadir. This data is useful in performance tuning. On Windows you must start mysqld-max from an MS-DOS prompt with the --console option if you want to direct the output to the MS-DOS prompt window.

There is a separate innodb_lock_monitor which prints the same information as innodb_monitor plus information on locks set by each transaction.

The printed information includes data on:

You can start InnoDB Monitor through the following SQL command:

CREATE TABLE innodb_monitor(a INT) type = innodb;

and stop it by

DROP TABLE innodb_monitor;

The CREATE TABLE syntax is just a way to pass a command to the InnoDB engine through the MySQL SQL parser: the created table is not relevant at all for InnoDB Monitor. If you shut down the database when the monitor is running, and you want to start the monitor again, you have to drop the table before you can issue a new CREATE TABLE to start the monitor. This syntax may change in a future release.

A sample output of the InnoDB Monitor:

================================
010809 18:45:06 INNODB MONITOR OUTPUT
================================
--------------------------
LOCKS HELD BY TRANSACTIONS
--------------------------
LOCK INFO:
Number of locks in the record hash table 1294
LOCKS FOR TRANSACTION ID 0 579342744
TABLE LOCK table test/mytable trx id 0 582333343 lock_mode IX

RECORD LOCKS space id 0 page no 12758 n bits 104 table test/mytable index
PRIMARY trx id 0 582333343 lock_mode X
Record lock, heap no 2 PHYSICAL RECORD: n_fields 74; 1-byte offs FALSE;
info bits 0
 0: len 4; hex 0001a801; asc ;; 1: len 6; hex 000022b5b39f; asc ";;
 2: len 7; hex 000002001e03ec; asc ;; 3: len 4; hex 00000001;
...
-----------------------------------------------
CURRENT SEMAPHORES RESERVED AND SEMAPHORE WAITS
-----------------------------------------------
SYNC INFO:
Sorry, cannot give mutex list info in non-debug version!
Sorry, cannot give rw-lock list info in non-debug version!
-----------------------------------------------------
SYNC ARRAY INFO: reservation count 6041054, signal count 2913432
4a239430 waited for by thread 49627477 op. S-LOCK file NOT KNOWN line 0
Mut ex 0 sp 5530989 r 62038708 sys 2155035;
rws 0 8257574 8025336; rwx 0 1121090 1848344
-----------------------------------------------------
CURRENT PENDING FILE I/O'S
--------------------------
Pending normal aio reads:
Reserved slot, messages 40157658 4a4a40b8
Reserved slot, messages 40157658 4a477e28
...
Reserved slot, messages 40157658 4a4424a8
Reserved slot, messages 40157658 4a39ea38
Total of 36 reserved aio slots
Pending aio writes:
Total of 0 reserved aio slots
Pending insert buffer aio reads:
Total of 0 reserved aio slots
Pending log writes or reads:
Reserved slot, messages 40158c98 40157f98
Total of 1 reserved aio slots
Pending synchronous reads or writes:
Total of 0 reserved aio slots
-----------
BUFFER POOL
-----------
LRU list length 8034
Free list length 0
Flush list length 999
Buffer pool size in pages 8192
Pending reads 39
Pending writes: LRU 0, flush list 0, single page 0
Pages read 31383918, created 51310, written 2985115
----------------------------
END OF INNODB MONITOR OUTPUT
============================
010809 18:45:22 InnoDB starts purge
010809 18:45:22 InnoDB purged 0 pages

Some notes on the output:

7.5.11 Implementation of Multi-versioning

Since InnoDB is a multi-versioned database, it must keep information of old versions of rows in the tablespace. This information is stored in a data structure we call a rollback segment after an analogous data structure in Oracle.

InnoDB internally adds two fields to each row stored in the database. A 6-byte field tells the transaction identifier for the last transaction which inserted or updated the row. Also a deletion is internally treated as an update where a special bit in the row is set to mark it as deleted. Each row also contains a 7-byte field called the roll pointer. The roll pointer points to an undo log record written to the rollback segment. If the row was updated, then the undo log record contains the information necessary to rebuild the content of the row before it was updated.

InnoDB uses the information in the rollback segment to perform the undo operations needed in a transaction rollback. It also uses the information to build earlier versions of a row for a consistent read.

Undo logs in the rollback segment are divided into insert and update undo logs. Insert undo logs are only needed in transaction rollback and can be discarded as soon as the transaction commits. Update undo logs are used also in consistent reads, and they can be discarded only after there is no transaction present for which InnoDB has assigned a snapshot that in a consistent read could need the information in the update undo log to build an earlier version of a database row.

You must remember to commit your transactions regularly, also those transactions which only issue consistent reads. Otherwise InnoDB cannot discard data from the update undo logs, and the rollback segment may grow too big, filling up your tablespace.

The physical size of an undo log record in the rollback segment is typically smaller than the corresponding inserted or updated row. You can use this information to calculate the space need for your rollback segment.

In our multi-versioning scheme a row is not physically removed from the database immediately when you delete it with an SQL statement. Only when InnoDB can discard the update undo log record written for the deletion, it can also physically remove the corresponding row and its index records from the database. This removal operation is called a purge, and it is quite fast, usually taking the same order of time as the SQL statement which did the deletion.

7.5.12 Table and Index Structures

MySQL stores its data dictionary information of tables in `.frm' files in database directories. But every InnoDB type table also has its own entry in InnoDB internal data dictionaries inside the tablespace. When MySQL drops a table or a database, it has to delete both a `.frm' file or files, and the corresponding entries inside the InnoDB data dictionary. This is the reason why you cannot move InnoDB tables between databases simply by moving the `.frm' files, and why DROP DATABASE did not work for InnoDB type tables in MySQL versions <= 3.23.43.

Every InnoDB table has a special index called the clustered index where the data of the rows is stored. If you define a PRIMARY KEY on your table, then the index of the primary key will be the clustered index.

If you do not define a primary key for your table, InnoDB will internally generate a clustered index where the rows are ordered by the row id InnoDB assigns to the rows in such a table. The row id is a 6-byte field which monotonically increases as new rows are inserted. Thus the rows ordered by the row id will be physically in the insertion order.

Accessing a row through the clustered index is fast, because the row data will be on the same page where the index search leads us. In many databases the data is traditionally stored on a different page from the index record. If a table is large, the clustered index architecture often saves a disk I/O when compared to the traditional solution.

The records in non-clustered indexes (we also call them secondary indexes), in InnoDB contain the primary key value for the row. InnoDB uses this primary key value to search for the row from the clustered index. Note that if the primary key is long, the secondary indexes will use more space.

7.5.12.1 Physical Structure of an Index

All indexes in InnoDB are B-trees where the index records are stored in the leaf pages of the tree. The default size of an index page is 16 KB. When new records are inserted, InnoDB tries to leave 1 / 16 of the page free for future insertions and updates of the index records.

If index records are inserted in a sequential (ascending or descending) order, the resulting index pages will be about 15/16 full. If records are inserted in a random order, then the pages will be 1/2 - 15/16 full. If the fillfactor of an index page drops below 1/2, InnoDB will try to contract the index tree to free the page.

7.5.12.2 Insert Buffering

It is a common situation in a database application that the primary key is a unique identifier and new rows are inserted in the ascending order of the primary key. Thus the insertions to the clustered index do not require random reads from a disk.

On the other hand, secondary indexes are usually non-unique and insertions happen in a relatively random order into secondary indexes. This would cause a lot of random disk I/Os without a special mechanism used in InnoDB.

If an index record should be inserted to a non-unique secondary index, InnoDB checks if the secondary index page is already in the buffer pool. If that is the case, InnoDB will do the insertion directly to the index page. But, if the index page is not found from the buffer pool, InnoDB inserts the record to a special insert buffer structure. The insert buffer is kept so small that it entirely fits in the buffer pool, and insertions can be made to it very fast.

The insert buffer is periodically merged to the secondary index trees in the database. Often we can merge several insertions on the same page in of the index tree, and hence save disk I/Os. It has been measured that the insert buffer can speed up insertions to a table up to 15 times.

7.5.12.3 Adaptive Hash Indexes

If a database fits almost entirely in main memory, then the fastest way to perform queries on it is to use hash indexes. InnoDB has an automatic mechanism which monitors index searches made to the indexes defined for a table, and if InnoDB notices that queries could benefit from building of a hash index, such an index is automatically built.

But note that the hash index is always built based on an existing B-tree index on the table. InnoDB can build a hash index on a prefix of any length of the key defined for the B-tree, depending on what search pattern InnoDB observes on the B-tree index. A hash index can be partial: it is not required that the whole B-tree index is cached in the buffer pool. InnoDB will build hash indexes on demand to those pages of the index which are often accessed.

In a sense, through the adaptive hash index mechanism InnoDB adapts itself to ample main memory, coming closer to the architecture of main memory databases.

7.5.12.4 Physical Record Structure

7.5.12.5 How an AUTO_INCREMENT Column Works in InnoDB

After a database startup, when a user first does an insert to a table T where an auto-increment column has been defined, and the user does not provide an explicit value for the column, then InnoDB executes SELECT MAX(auto-inc-column) FROM T, and assigns that value incremented by one to the column and the auto-increment counter of the table. We say that the auto-increment counter for table T has been initialised.

InnoDB follows the same procedure in initialising the auto-increment counter for a freshly created table.

Note that if the user specifies in an insert the value 0 to the auto-increment column, then InnoDB treats the row like the value would not have been specified.

After the auto-increment counter has been initialised, if a user inserts a row where he explicitly specifies the column value, and the value is bigger than the current counter value, then the counter is set to the specified column value. If the user does not explicitly specify a value, then InnoDB increments the counter by one and assigns its new value to the column.

The auto-increment mechanism, when assigning values from the counter, bypasses locking and transaction handling. Therefore you may also get gaps in the number sequence if you roll back transactions which have got numbers from the counter.

The behaviour of auto-increment is not defined if a user gives a negative value to the column or if the value becomes bigger than the maximum integer that can be stored in the specified integer type.

7.5.13 File Space Management and Disk I/O

7.5.13.1 Disk I/O

In disk I/O InnoDB uses asynchronous I/O. On Windows NT it uses the native asynchronous I/O provided by the operating system. On Unix, InnoDB uses simulated asynchronous I/O built into InnoDB: InnoDB creates a number of I/O threads to take care of I/O operations, such as read-ahead. In a future version we will add support for simulated aio on Windows NT and native aio on those versions of Unix which have one.

On Windows NT InnoDB uses non-buffered I/O. That means that the disk pages InnoDB reads or writes are not buffered in the operating system file cache. This saves some memory bandwidth.

Starting from 3.23.41 InnoDB uses a novel file flush technique called doublewrite. It adds safety to crash recovery after an operating system crash or a power outage, and improves performance on most Unix flavors by reducing the need for fsync operations.

Doublewrite means that InnoDB before writing pages to a datafile first writes them to a contiguous tablespace area called the doublewrite buffer. Only after the write and the flush to the doublewrite buffer has completed, InnoDB writes the pages to their proper positions in the datafile. If the operating system crashes in the middle of a page write, InnoDB will in recovery find a good copy of the page from the doublewrite buffer.

Starting from 3.23.41 you can also use a raw disk partition as a datafile, though this has not been tested yet. When you create a new datafile you have to put the keyword newraw immediately after the datafile size in innodb_data_file_path. The partition must be at least as large as the size that you specify. Note that 1M in InnoDB is 1024 x 1024 bytes, while in disk specifications 1 MB usually means 1000 000 bytes.

innodb_data_file_path=/dev/hdd1:5Gnewraw;/dev/hdd2:2Gnewraw

When you start the database again you must change the keyword to raw. Otherwise, InnoDB will write over your partition!

innodb_data_file_path=/dev/hdd1:5Graw;/dev/hdd2:2Graw

By using a raw disk you can on some versions of Unix perform unbuffered I/O.

When you use raw disk partitions, make sure they have permissions that allow read and write access to the account used for running the MySQL server.

There are two read-ahead heuristics in InnoDB: sequential read-ahead and random read-ahead. In sequential read-ahead InnoDB notices that the access pattern to a segment in the tablespace is sequential. Then InnoDB will post in advance a batch of reads of database pages to the I/O system. In random read-ahead InnoDB notices that some area in a tablespace seems to be in the process of being fully read into the buffer pool. Then InnoDB posts the remaining reads to the I/O system.

7.5.13.2 File Space Management

The datafiles you define in the configuration file form the tablespace of InnoDB. The files are simply catenated to form the tablespace, there is no striping in use. Currently you cannot define where in the tablespace your tables will be allocated. However, in a newly created tablespace, InnoDB will allocate space starting from the low end.

The tablespace consists of database pages whose default size is 16 KB. The pages are grouped into extents of 64 consecutive pages. The 'files' inside a tablespace are called segments in InnoDB. The name of the rollback segment is somewhat misleading because it actually contains many segments in the tablespace.

For each index in InnoDB we allocate two segments: one is for non-leaf nodes of the B-tree, the other is for the leaf nodes. The idea here is to achieve better sequentiality for the leaf nodes, which contain the data.

When a segment grows inside the tablespace, InnoDB allocates the first 32 pages to it individually. After that InnoDB starts to allocate whole extents to the segment. InnoDB can add to a large segment up to 4 extents at a time to ensure good sequentiality of data.

Some pages in the tablespace contain bitmaps of other pages, and therefore a few extents in an InnoDB tablespace cannot be allocated to segments as a whole, but only as individual pages.

When you issue a query SHOW TABLE STATUS FROM ... LIKE ... to ask for available free space in the tablespace, InnoDB will report the extents which are definitely free in the tablespace. InnoDB always reserves some extents for clean-up and other internal purposes; these reserved extents are not included in the free space.

When you delete data from a table, InnoDB will contract the corresponding B-tree indexes. It depends on the pattern of deletes if that frees individual pages or extents to the tablespace, so that the freed space is available for other users. Dropping a table or deleting all rows from it is guaranteed to release the space to other users, but remember that deleted rows can be physically removed only in a purge operation after they are no longer needed in transaction rollback or consistent read.

7.5.13.3 Defragmenting a Table

If there are random insertions or deletions in the indexes of a table, the indexes may become fragmented. By fragmentation we mean that the physical ordering of the index pages on the disk is not close to the alphabetical ordering of the records on the pages, or that there are many unused pages in the 64-page blocks which were allocated to the index.

It can speed up index scans if you periodically use mysqldump to dump the table to a text file, drop the table, and reload it from the dump. Another way to do the defragmenting is to perform a 'null' alter table operation ALTER TABLE tablename TYPE=InnoDB. That makes MySQL to rebuild the table.

If the insertions to an index are always ascending and records are deleted only from the end, then the file space management algorithm of InnoDB guarantees that fragmentation in the index will not occur.

7.5.14 Error Handling

The error handling in InnoDB is not always the same as specified in the SQL standard. According to SQL-99, any error during an SQL statement should cause the rollback of that statement. InnoDB sometimes rolls back only part of the statement, or the whole transaction. The following list specifies the error handling of InnoDB.

7.5.15 Restrictions on InnoDB Tables

7.5.16 InnoDB Change History

7.5.16.1 MySQL/InnoDB-4.0.14, July 22, 2003

7.5.16.2 MySQL/InnoDB-3.23.57, June 20, 2003

7.5.16.3 MySQL/InnoDB-4.0.13, May 20, 2003

7.5.16.4 MySQL/InnoDB-4.1.0, April 3, 2003

7.5.16.5 MySQL/InnoDB-3.23.56, March 17, 2003

7.5.16.6 MySQL/InnoDB-4.0.12, March 18, 2003

7.5.16.7 MySQL/InnoDB-4.0.11, February 25, 2003

7.5.16.8 MySQL/InnoDB-4.0.10, February 4, 2003

7.5.16.9 MySQL/InnoDB-3.23.55, January 24, 2003

7.5.16.10 MySQL/InnoDB-4.0.9, January 14, 2003

7.5.16.11 MySQL/InnoDB-4.0.8, January 7, 2003

7.5.16.12 MySQL/InnoDB-4.0.7, December 26, 2002

7.5.16.13 MySQL/InnoDB-4.0.6, December 19, 2002

7.5.16.14 MySQL/InnoDB-3.23.54, December 12, 2002

7.5.16.15 MySQL/InnoDB-4.0.5, November 18, 2002

7.5.16.16 MySQL/InnoDB-3.23.53, October 9, 2002

7.5.16.17 MySQL/InnoDB-4.0.4, October 2, 2002

7.5.16.18 MySQL/InnoDB-4.0.3, August 28, 2002

7.5.16.19 MySQL/InnoDB-3.23.52, August 16, 2002

7.5.16.20 MySQL/InnoDB-4.0.2, July 10, 2002

7.5.16.21 MySQL/InnoDB-3.23.51, June 12, 2002

7.5.16.22 MySQL/InnoDB-3.23.50, April 23, 2002

7.5.16.23 MySQL/InnoDB-3.23.49, February 17, 2002

7.5.16.24 MySQL/InnoDB-3.23.48, February 9, 2002

7.5.16.25 MySQL/InnoDB-3.23.47, December 28, 2001

7.5.16.26 MySQL/InnoDB-4.0.1, December 23, 2001

7.5.16.27 MySQL/InnoDB-3.23.46, November 30, 2001

7.5.16.28 MySQL/InnoDB-3.23.45, November 23, 2001

7.5.16.29 MySQL/InnoDB-3.23.44, November 2, 2001

7.5.16.30 MySQL/InnoDB-3.23.43, October 4, 2001

7.5.16.31 MySQL/InnoDB-3.23.42, September 9, 2001

7.5.16.32 MySQL/InnoDB-3.23.41, August 13, 2001

7.5.16.33 MySQL/InnoDB-3.23.40, July 16, 2001

7.5.16.34 MySQL/InnoDB-3.23.39, June 13, 2001

7.5.16.35 MySQL/InnoDB-3.23.38, May 12, 2001

7.5.17 InnoDB Contact Information

Contact information of Innobase Oy, producer of the InnoDB engine. Web site: http://www.innodb.com/. E-mail: sales@innodb.com

phone: 358-9-6969 3250 (office) 358-40-5617367 (mobile)
Innobase Oy Inc.
World Trade Center Helsinki
Aleksanterinkatu 17
P.O.Box 800
00101 Helsinki
Finland

7.6 BDB or BerkeleyDB Tables

7.6.1 Overview of BDB Tables

BerkeleyDB, available at http://www.sleepycat.com/ has provided MySQL with a transactional storage engine. Support for this storage engine is included in the MySQL source distribution starting from version 3.23.34 and is activated in the MySQL-Max binary. This storage engine is typically called BDB for short.

BDB tables may have a greater chance of surviving crashes and are also capable of COMMIT and ROLLBACK operations on transactions. The MySQL source distribution comes with a BDB distribution that has a couple of small patches to make it work more smoothly with MySQL. You can't use a non-patched BDB version with MySQL.

We at MySQL AB are working in close cooperation with Sleepycat to keep the quality of the MySQL/BDB interface high.

When it comes to supporting BDB tables, we are committed to help our users to locate the problem and help creating a reproducible test case for any problems involving BDB tables. Any such test case will be forwarded to Sleepycat who in turn will help us find and fix the problem. As this is a two-stage operation, any problems with BDB tables may take a little longer for us to fix than for other storage engines. However, as the BerkeleyDB code itself has been used by many other applications than MySQL, we don't envision any big problems with this. See section 1.4.1 Support Offered by MySQL AB.

7.6.2 Installing BDB

If you have downloaded a binary version of MySQL that includes support for BerkeleyDB, simply follow the instructions for installing a binary version of MySQL. See section 2.2.11 Installing a MySQL Binary Distribution. See section 4.7.5 mysqld-max, An Extended mysqld Server.

To compile MySQL with Berkeley DB support, download MySQL Version 3.23.34 or newer and configure MySQL with the --with-berkeley-db option. See section 2.3 Installing a MySQL Source Distribution.

cd /path/to/source/of/mysql-3.23.34
./configure --with-berkeley-db

Please refer to the manual provided with the BDB distribution for more updated information.

Even though Berkeley DB is in itself very tested and reliable, the MySQL interface is still considered gamma quality. We are actively improving and optimising it to get it stable very soon.

7.6.3 BDB startup options

If you are running with AUTOCOMMIT=0 then your changes in BDB tables will not be updated until you execute COMMIT. Instead of commit you can execute ROLLBACK to forget your changes. See section 6.7.1 START TRANSACTION, COMMIT, and ROLLBACK Syntax.

If you are running with AUTOCOMMIT=1 (the default), your changes will be committed immediately. You can start an extended transaction with the BEGIN WORK SQL command, after which your changes will not be committed until you execute COMMIT (or decide to ROLLBACK the changes).

The following options to mysqld can be used to change the behaviour of BDB tables:

Option Description
--bdb-home=directory Base directory for BDB tables. This should be the same directory you use for --datadir.
--bdb-lock-detect=# Berkeley lock detect. One of (DEFAULT, OLDEST, RANDOM, or YOUNGEST).
--bdb-logdir=directory Berkeley DB log file directory.
--bdb-no-sync Don't synchronously flush logs.
--bdb-no-recover Don't start Berkeley DB in recover mode.
--bdb-shared-data Start Berkeley DB in multi-process mode (Don't use DB_PRIVATE when initialising Berkeley DB)
--bdb-tmpdir=directory Berkeley DB temporary file directory.
--skip-bdb Disable usage of BDB tables.
-O bdb_max_lock=1000 Set the maximum number of locks possible. See section 4.5.7.4 SHOW VARIABLES.

If you use --skip-bdb, MySQL will not initialise the Berkeley DB library and this will save a lot of memory. Of course, you cannot use BDB tables if you are using this option. If you try to create a BDB table, MySQL will instead create a MyISAM table.

Normally you should start mysqld without --bdb-no-recover if you intend to use BDB tables. This may, however, give you problems when you try to start mysqld if the BDB log files are corrupted. See section 2.4.2 Problems Starting the MySQL Server.

With bdb_max_lock you can specify the maximum number of locks (10000 by default) you can have active on a BDB table. You should increase this if you get errors of type bdb: Lock table is out of available locks or Got error 12 from ... when you have do long transactions or when mysqld has to examine a lot of rows to calculate the query.

You may also want to change binlog_cache_size and max_binlog_cache_size if you are using big multi-line transactions. See section 6.7.1 START TRANSACTION, COMMIT, and ROLLBACK Syntax.

7.6.4 Characteristics of BDB tables:

7.6.5 Things we need to fix for BDB in the near future:

7.6.6 Operating systems supported by BDB

Currently we know that the BDB storage engine works with the following operating systems:

It doesn't work with the following operating systems:

Note: The above list is not complete; we will update it as we receive more information.

If you build MySQL with support for BDB tables and get the following error in the log file when you start mysqld:

bdb: architecture lacks fast mutexes: applications cannot be threaded
Can't init databases

This means that BDB tables are not supported for your architecture. In this case you must rebuild MySQL without BDB table support.

7.6.7 Restrictions on BDB Tables

Here follows the restrictions you have when using BDB tables:

7.6.8 Errors That May Occur When Using BDB Tables


Go to the first, previous, next, last section, table of contents.