Chapter 3. Special Characters

Special Characters Found In Scripts and Elsewhere

#

Comments. Lines beginning with a # (with the exception of #!) are comments.

   1 # This line is a comment.

Comments may also occur at the end of a command.

   1 echo "A comment will follow." # Comment here.

Comments may also follow whitespace at the beginning of a line.

   1 	# A tab precedes this comment.

Caution

A command may not follow a comment on the same line. There is no method of terminating the comment, in order for "live code" to begin on the same line. Use a new line for the next command.

Note

Of course, an escaped # in an echo statement does not begin a comment. Likewise, a # appears in certain parameter substitution constructs and in numerical constant expressions.
   1 echo "The # here does not begin a comment."
   2 echo 'The # here does not begin a comment.'
   3 echo The \# here does not begin a comment.
   4 echo The # here begins a comment.
   5 
   6 echo ${PATH#*:}       # Parameter substitution, not a comment.
   7 echo $(( 2#101011 ))  # Base conversion, not a comment.
   8 
   9 # Thanks, S.C.
The standard quoting and escape characters (" ' \) escape the #.

Certain pattern matching operations also use the #.

;

Command separator. [Semicolon] Permits putting two or more commands on the same line.

   1 echo hello; echo there

Note that the ";" sometimes needs to be escaped.

;;

Terminator in a case option. [Double semicolon]

   1 case "$variable" in
   2 abc)  echo "$variable = abc" ;;
   3 xyz)  echo "$variable = xyz" ;;
   4 esac

.

"dot" command. [period] Equivalent to source (see Example 11-18). This is a bash builtin.

.

"dot", as a component of a filename. When working with filenames, a dot is the prefix of a "hidden" file, a file that an ls will not normally show.
 bash$ touch .hidden-file
 bash$ ls -l	      
 total 10
 -rw-r--r--    1 bozo      4034 Jul 18 22:04 data1.addressbook
 -rw-r--r--    1 bozo      4602 May 25 13:58 data1.addressbook.bak
 -rw-r--r--    1 bozo       877 Dec 17  2000 employment.addressbook
 
 
 bash$ ls -al	      
 total 14
 drwxrwxr-x    2 bozo  bozo      1024 Aug 29 20:54 ./
 drwx------   52 bozo  bozo      3072 Aug 29 20:51 ../
 -rw-r--r--    1 bozo  bozo      4034 Jul 18 22:04 data1.addressbook
 -rw-r--r--    1 bozo  bozo      4602 May 25 13:58 data1.addressbook.bak
 -rw-r--r--    1 bozo  bozo       877 Dec 17  2000 employment.addressbook
 -rw-rw-r--    1 bozo  bozo         0 Aug 29 20:54 .hidden-file
 	        

When considering directory names, a single dot represents the current working directory, and two dots denote the parent directory.

 bash$ pwd
 /home/bozo/projects
 
 bash$ cd .
 bash$ pwd
 /home/bozo/projects
 
 bash$ cd ..
 bash$ pwd
 /home/bozo/
 	        

The dot often appears as the destination (directory) of a file movement command.

 bash$ cp /home/bozo/current_work/junk/* .
 	        

.

"dot" character match. When matching characters, as part of a regular expression, a "dot" matches a single character.

"

partial quoting. [double quote] "STRING" preserves (from interpretation) most of the special characters within STRING. See also Chapter 5.

'

full quoting. [single quote] 'STRING' preserves all special characters within STRING. This is a stronger form of quoting than using ". See also Chapter 5.

,

comma operator. The comma operator links together a series of arithmetic operations. All are evaluated, but only the last one is returned.
   1 let "t2 = ((a = 9, 15 / 3))"  # Set "a" and calculate "t2".

\

escape. [backslash] \X "escapes" the character X. This has the effect of "quoting" X, equivalent to 'X'. The \ may be used to quote " and ', so they are expressed literally.

See Chapter 5 for an in-depth explanation of escaped characters.

/

Filename path separator. [forward slash] Separates the components of a filename (as in /home/bozo/projects/Makefile).

This is also the division arithmetic operator.

`

command substitution. [backticks] `command` makes available the output of command for setting a variable. This is also known as backticks or backquotes.

:

null command. [colon] This is the shell equivalent of a "NOP" (no op, a do-nothing operation). It may be considered a synonym for the shell builtin true. The ":" command is a itself a Bash builtin, and its exit status is "true" (0).

   1 :
   2 echo $?   # 0

Endless loop:

   1 while :
   2 do
   3    operation-1
   4    operation-2
   5    ...
   6    operation-n
   7 done
   8 
   9 # Same as:
  10 #    while true
  11 #    do
  12 #      ...
  13 #    done

Placeholder in if/then test:

   1 if condition
   2 then :   # Do nothing and branch ahead
   3 else
   4    take-some-action
   5 fi

Provide a placeholder where a binary operation is expected, see Example 8-2 and default parameters.

   1 : ${username=`whoami`}
   2 # ${username=`whoami`}   without the leading : gives an error
   3 #                        unless "username" is a command or builtin...

Provide a placeholder where a command is expected in a here document. See Example 17-10.

Evaluate string of variables using parameter substitution (as in Example 9-13).
   1 : ${HOSTNAME?} ${USER?} ${MAIL?}
   2 #Prints error message if one or more of essential environmental variables not set.

Variable expansion / substring replacement.

In combination with the > redirection operator, truncates a file to zero length, without changing its permissions. If the file did not previously exist, creates it.
   1 : > data.xxx   # File "data.xxx" now empty.	      
   2 
   3 # Same effect as   cat /dev/null >data.xxx
   4 # However, this does not fork a new process, since ":" is a builtin.
See also Example 12-11.

In combination with the >> redirection operator, updates a file access/modification time (: >> new_file). If the file did not previously exist, creates it. This is equivalent to touch.

Note

This applies to regular files, not pipes, symlinks, and certain special files.

May be used to begin a comment line, although this is not recommended. Using # for a comment turns off error checking for the remainder of that line, so almost anything may be appear in a comment. However, this is not the case with :.
   1 : This is a comment that generates an error, ( if [ $x -eq 3] ).

The ":" also serves as a field separator, in /etc/passwd, and in the $PATH variable.
 bash$ echo $PATH
 /usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/usr/games

!

reverse (or negate) the sense of a test or exit status. The ! operator inverts the exit status of the command to which it is applied (see Example 6-2). It also inverts the meaning of a test operator. This can, for example, change the sense of "equal" ( = ) to "not-equal" ( != ). The ! operator is a Bash keyword.

In a different context, the ! also appears in indirect variable references.

In yet another context, from the command line, the ! invokes the Bash history mechanism (see Appendix F). Note that within a script, the history mechanism is disabled.

*

wild card. [asterisk] The * character serves as a "wild card" for filename expansion in globbing. By itself, it matches every filename in a given directory.

 bash$ echo *
 abs-book.sgml add-drive.sh agram.sh alias.sh
 	      

The * also represents any number (or zero) characters in a regular expression.

*

arithmetic operator. In the context of arithmetic operations, the * denotes multiplication.

A double asterisk, **, is the exponentiation operator.

?

test operator. Within certain expressions, the ? indicates a test for a condition.

In a double parentheses construct, the ? serves as a C-style trinary operator. See Example 9-28.

In a parameter substitution expression, the ? tests whether a variable has been set.

?

wild card. The ? character serves as a single-character "wild card" for filename expansion in globbing, as well as representing one character in an extended regular expression.

$

Variable substitution.
   1 var1=5
   2 var2=23skidoo
   3 
   4 echo $var1     # 5
   5 echo $var2     # 23skidoo

A $ prefixing a variable name indicates the value the variable holds.

$

end-of-line. In a regular expression, a "$" addresses the end of a line of text.

${}
$*, $@
$?

exit status variable. The $? variable holds the exit status of a command, a function, or of the script itself.

$$

process id variable. The $$ variable holds the process id of the script in which it appears.

()

command group.
   1 (a=hello; echo $a)

Important

A listing of commands within parentheses starts a subshell.

Variables inside parentheses, within the subshell, are not visible to the rest of the script. The parent process, the script, cannot read variables created in the child process, the subshell.
   1 a=123
   2 ( a=321; )	      
   3 
   4 echo "a = $a"   # a = 123
   5 # "a" within parentheses acts like a local variable.

array initialization.
   1 Array=(element1 element2 element3)

{xxx,yyy,zzz,...}

Brace expansion.
   1 grep Linux file*.{txt,htm*}
   2 # Finds all instances of the word "Linux"
   3 # in the files "fileA.txt", "file2.txt", "fileR.html", "file-87.htm", etc.

A command may act upon a comma-separated list of file specs within braces. [1] Filename expansion (globbing) applies to the file specs between the braces.

Caution

No spaces allowed within the braces unless the spaces are quoted or escaped.

echo {file1,file2}\ :{\ A," B",' C'}

file1 : A file1 : B file1 : C file2 : A file2 : B file2 : C

{}

Block of code. [curly brackets] Also referred to as an "inline group", this construct, in effect, creates an anonymous function. However, unlike a function, the variables in a code block remain visible to the remainder of the script.

 bash$ { local a; a=123; }
 bash: local: can only be used in a function
 	      

   1 a=123
   2 { a=321; }
   3 echo "a = $a"   # a = 321   (value inside code block)
   4 
   5 # Thanks, S.C.

The code block enclosed in braces may have I/O redirected to and from it.


Example 3-1. Code blocks and I/O redirection

   1 #!/bin/bash
   2 # Reading lines in /etc/fstab.
   3 
   4 File=/etc/fstab
   5 
   6 {
   7 read line1
   8 read line2
   9 } < $File
  10 
  11 echo "First line in $File is:"
  12 echo "$line1"
  13 echo
  14 echo "Second line in $File is:"
  15 echo "$line2"
  16 
  17 exit 0


Example 3-2. Saving the results of a code block to a file

   1 #!/bin/bash
   2 # rpm-check.sh
   3 
   4 # Queries an rpm file for description, listing, and whether it can be installed.
   5 # Saves output to a file.
   6 # 
   7 # This script illustrates using a code block.
   8 
   9 SUCCESS=0
  10 E_NOARGS=65
  11 
  12 if [ -z "$1" ]
  13 then
  14   echo "Usage: `basename $0` rpm-file"
  15   exit $E_NOARGS
  16 fi  
  17 
  18 { 
  19   echo
  20   echo "Archive Description:"
  21   rpm -qpi $1       # Query description.
  22   echo
  23   echo "Archive Listing:"
  24   rpm -qpl $1       # Query listing.
  25   echo
  26   rpm -i --test $1  # Query whether rpm file can be installed.
  27   if [ "$?" -eq $SUCCESS ]
  28   then
  29     echo "$1 can be installed."
  30   else
  31     echo "$1 cannot be installed."
  32   fi  
  33   echo
  34 } > "$1.test"       # Redirects output of everything in block to file.
  35 
  36 echo "Results of rpm test in file $1.test"
  37 
  38 # See rpm man page for explanation of options.
  39 
  40 exit 0

Note

Unlike a command group within (parentheses), as above, a code block enclosed by {braces} will not normally launch a subshell. [2]

{} \;

pathname. Mostly used in find constructs. This is not a shell builtin.

Note

The ";" ends the -exec option of a find command sequence. It needs to be escaped to protect it from interpretation by the shell.

[ ]

test.

Test expression between [ ]. Note that [ is part of the shell builtin test (and a synonym for it), not a link to the external command /usr/bin/test.

[[ ]]

test.

Test expression between [[ ]] (shell keyword).

See the discussion on the [[ ... ]] construct.

[ ]

array element.

In the context of an array, brackets set off the numbering of each element of that array.
   1 Array[1]=slot_1
   2 echo ${Array[1]}

[ ]

range of characters.

As part of a regular expression, brackets delineate a range of characters to match.

(( ))

integer expansion.

Expand and evaluate integer expression between (( )).

See the discussion on the (( ... )) construct.

> &> >& >> <

scriptname >filename redirects the output of scriptname to file filename. Overwrite filename if it already exists.

command &>filename redirects both the stdout and the stderr of command to filename.

command >&2 redirects stdout of command to stderr.

scriptname >>filename appends the output of scriptname to file filename. If filename does not already exist, it will be created.

(command)>

<(command)

In a different context, the "<" and ">" characters act as string comparison operators.

In yet another context, the "<" and ">" characters act as integer comparison operators. See also Example 12-6.

<<

redirection used in a here document.

<, >

ASCII comparison.
   1 veg1=carrots
   2 veg2=tomatoes
   3 
   4 if [[ "$veg1" < "$veg2" ]]
   5 then
   6   echo "Although $veg1 precede $veg2 in the dictionary,"
   7   echo "this implies nothing about my culinary preferences."
   8 else
   9   echo "What kind of dictionary are you using, anyhow?"
  10 fi

\<, \>

bash$ grep '\<the\>' textfile

|

pipe. Passes the output of previous command to the input of the next one, or to the shell. This is a method of chaining commands together.

   1 echo ls -l | sh
   2 #  Passes the output of "echo ls -l" to the shell,
   3 #+ with the same result as a simple "ls -l".
   4 
   5 
   6 cat *.lst | sort | uniq
   7 # Merges and sorts all ".lst" files, then deletes duplicate lines.

The output of a command or commands may be piped to a script.
   1 #!/bin/bash
   2 # uppercase.sh : Changes input to uppercase.
   3 
   4 tr 'a-z' 'A-Z'
   5 #  Letter ranges must be quoted
   6 #+ to prevent filename generation from single-letter filenames.
   7 
   8 exit 0
Now, let us pipe the output of ls -l to this script.
 bash$ ls -l | ./uppercase.sh
 -RW-RW-R--    1 BOZO  BOZO       109 APR  7 19:49 1.TXT
 -RW-RW-R--    1 BOZO  BOZO       109 APR 14 16:48 2.TXT
 -RW-R--R--    1 BOZO  BOZO       725 APR 20 20:56 DATA-FILE
 	      

Note

The stdout of each process in a pipe must be read as the stdin of the next. If this is not the case, the data stream will block, and the pipe will not behave as expected.
   1 cat file1 file2 | ls -l | sort
   2 # The output from "cat file1 file2" disappears.

A pipe runs as a child process, and therefore cannot alter script variables.
   1 variable="initial_value"
   2 echo "new_value" | read variable
   3 echo "variable = $variable"     # variable = initial_value

If one of the commands in the pipe aborts, this prematurely terminates execution of the pipe. Called a broken pipe, this condition sends a SIGPIPE signal.

>|

force redirection (even if the noclobber option is set). This will forcibly overwrite an existing file.

||

OR logical operator. In a test construct, the || operator causes a return of 0 (success) if either of the linked test conditions is true.

&

Run job in background. A command followed by an & will run in the background.

 bash$ sleep 10 &
 [1] 850
 [1]+  Done                    sleep 10
 	      

Within a script, commands and even loops may run in the background.


Example 3-3. Running a loop in the background

   1 #!/bin/bash
   2 # background-loop.sh
   3 
   4 for i in 1 2 3 4 5 6 7 8 9 10            # First loop.
   5 do
   6   echo -n "$i "
   7 done & # Run this loop in background.
   8        # Will sometimes execute after second loop.
   9 
  10 echo   # This 'echo' sometimes will not display.
  11 
  12 for i in 11 12 13 14 15 16 17 18 19 20   # Second loop.
  13 do
  14   echo -n "$i "
  15 done  
  16 
  17 echo   # This 'echo' sometimes will not display.
  18 
  19 # ======================================================
  20 
  21 # The expected output from the script:
  22 # 1 2 3 4 5 6 7 8 9 10 
  23 # 11 12 13 14 15 16 17 18 19 20 
  24 
  25 # Sometimes, though, you get:
  26 # 11 12 13 14 15 16 17 18 19 20 
  27 # 1 2 3 4 5 6 7 8 9 10 bozo $
  28 # (The second 'echo' doesn't execute. Why?)
  29 
  30 # Occasionally also:
  31 # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
  32 # (The first 'echo' doesn't execute. Why?)
  33 
  34 # Very rarely something like:
  35 # 11 12 13 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 
  36 # The foreground loop preempts the background one.
  37 
  38 exit 0

Caution

A command run in the background within a script may cause the script to hang, waiting for a keystroke. Fortunately, there is a remedy for this.

&&

AND logical operator. In a test construct, the && operator causes a return of 0 (success) only if both the linked test conditions are true.

-

option, prefix. Option flag for a command or filter. Prefix for an operator.

COMMAND -[Option1][Option2][...]

ls -al

sort -dfu $filename

set -- $variable

   1 if [ $file1 -ot $file2 ]
   2 then
   3   echo "File $file1 is older than $file2."
   4 fi
   5 
   6 if [ "$a" -eq "$b" ]
   7 then
   8   echo "$a is equal to $b."
   9 fi
  10 
  11 if [ "$c" -eq 24 -a "$d" -eq 47 ]
  12 then
  13   echo "$c equals 24 and $d equals 47."
  14 fi

-

redirection from/to stdin or stdout. [dash]

   1 (cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xpvf -)
   2 # Move entire file tree from one directory to another
   3 # [courtesy Alan Cox <a.cox@swansea.ac.uk>, with a minor change]
   4 
   5 # 1) cd /source/directory    Source directory, where the files to be moved are.
   6 # 2) &&                     "And-list": if the 'cd' operation successful, then execute the next command.
   7 # 3) tar cf - .              The 'c' option 'tar' archiving command creates a new archive,
   8 #                            the 'f' (file) option, followed by '-' designates the target file as stdout,
   9 #                            and do it in current directory tree ('.').
  10 # 4) |                       Piped to...
  11 # 5) ( ... )                 a subshell
  12 # 6) cd /dest/directory      Change to the destination directory.
  13 # 7) &&                     "And-list", as above
  14 # 8) tar xpvf -              Unarchive ('x'), preserve ownership and file permissions ('p'),
  15 #                            and send verbose messages to stdout ('v'),
  16 #                            reading data from stdin ('f' followed by '-').
  17 #
  18 #                            Note that 'x' is a command, and 'p', 'v', 'f' are options.
  19 # Whew!
  20 
  21 
  22 
  23 # More elegant than, but equivalent to:
  24 #   cd source-directory
  25 #   tar cf - . | (cd ../target-directory; tar xzf -)
  26 #
  27 # cp -a /source/directory /dest     also has same effect.

   1 bunzip2 linux-2.4.3.tar.bz2 | tar xvf -
   2 # --uncompress tar file--    | --then pass it to "tar"--
   3 # If "tar" has not been patched to handle "bunzip2",
   4 # this needs to be done in two discrete steps, using a pipe.
   5 # The purpose of the exercise is to unarchive "bzipped" kernel source.

Note that in this context the "-" is not itself a Bash operator, but rather an option recognized by certain UNIX utilities that write to stdout, such as tar, cat, etc.

 bash$ echo "whatever" | cat -
 whatever 

Where a filename is expected, - redirects output to stdout (sometimes seen with tar cf), or accepts input from stdin, rather than from a file. This is a method of using a file-oriented utility as a filter in a pipe.

 bash$ file
 Usage: file [-bciknvzL] [-f namefile] [-m magicfiles] file...
 	      
By itself on the command line, file fails with an error message.

Add a "-" for a more useful result. This causes the shell to await user input.
 bash$ file -
 abc
 standard input:              ASCII text
 
 
 
 bash$ file -
 #!/bin/bash
 standard input:              Bourne-Again shell script text executable
 	      
Now the command accepts input from stdin and analyzes it.

The "-" can be used to pipe stdout to other commands. This permits such stunts as prepending lines to a file.

Using diff to compare a file with a section of another:

grep Linux file1 | diff file2 -

Finally, a real-world example using - with tar.


Example 3-4. Backup of all files changed in last day

   1 #!/bin/bash
   2 
   3 #  Backs up all files in current directory modified within last 24 hours
   4 #+ in a "tarball" (tarred and gzipped file).
   5 
   6 BACKUPFILE=backup
   7 archive=${1:-$BACKUPFILE}
   8 #  If no backup-archive filename specified on command line,
   9 #+ it will default to "backup.tar.gz."
  10 
  11 tar cvf - `find . -mtime -1 -type f -print` > $archive.tar
  12 gzip $archive.tar
  13 echo "Directory $PWD backed up in archive file \"$archive.tar.gz\"."
  14 
  15 
  16 #  Stephane Chazelas points out that the above code will fail
  17 #+ if there are too many files found
  18 #+ or if any filenames contain blank characters.
  19 
  20 # He suggests the following alternatives:
  21 # -------------------------------------------------------------------
  22 #   find . -mtime -1 -type f -print0 | xargs -0 tar rvf "$archive.tar"
  23 #      using the GNU version of "find".
  24 
  25 
  26 #   find . -mtime -1 -type f -exec tar rvf "$archive.tar" '{}' \;
  27 #         portable to other UNIX flavors, but much slower.
  28 # -------------------------------------------------------------------
  29 
  30 
  31 exit 0

Caution

Filenames beginning with "-" may cause problems when coupled with the "-" redirection operator. A script should check for this and add an appropriate prefix to such filenames, for example ./-FILENAME, $PWD/-FILENAME, or $PATHNAME/-FILENAME.

If the value of a variable begins with a -, this may likewise create problems.
   1 var="-n"
   2 echo $var		
   3 # Has the effect of "echo -n", and outputs nothing.

-

previous working directory. [dash] cd - changes to the previous working directory. This uses the $OLDPWD environmental variable.

Caution

Do not confuse the "-" used in this sense with the "-" redirection operator just discussed. The interpretation of the "-" depends on the context in which it appears.

-

Minus. Minus sign in an arithmetic operation.

=

Equals. Assignment operator
   1 a=28
   2 echo $a   # 28

In a different context, the "=" is a string comparison operator.

+

Plus. Addition arithmetic operator.

In a different context, the + is a Regular Expression operator.

+

Option. Option flag for a command or filter.

Certain commands and builtins use the + to enable certain options and the - to disable them.

%

modulo. Modulo (remainder of a division) arithmetic operation.

In a different context, the % is a pattern matching operator.

~

home directory. [tilde] This corresponds to the $HOME internal variable. ~bozo is bozo's home directory, and ls ~bozo lists the contents of it. ~/ is the current user's home directory, and ls ~/ lists the contents of it.
 bash$ echo ~bozo
 /home/bozo
 
 bash$ echo ~
 /home/bozo
 
 bash$ echo ~/
 /home/bozo/
 
 bash$ echo ~:
 /home/bozo:
 
 bash$ echo ~nonexistent-user
 ~nonexistent-user
 	      

~+

current working directory. This corresponds to the $PWD internal variable.

~-

previous working directory. This corresponds to the $OLDPWD internal variable.

^

beginning-of-line. In a regular expression, a "^" addresses the beginning of a line of text.

Control Characters

change the behavior of the terminal or text display. A control character is a CONTROL + key combination.

  • Ctl-C

    Terminate a foreground job.

  • Ctl-D

    Log out from a shell (similar to exit).

    "EOF" (end of file). This also terminates input from stdin.

  • Ctl-G

    "BEL" (beep).

  • Ctl-H

    Backspace.

       1 #!/bin/bash
       2 # Embedding Ctl-H in a string.
       3 
       4 a="^H^H"                  # Two Ctl-H's (backspaces).
       5 echo "abcdef"             # abcdef
       6 echo -n "abcdef$a "       # abcd f
       7 #  Space at end  ^              ^ Backspaces twice.
       8 echo -n "abcdef$a"        # abcdef
       9 #  No space at end                Doesn't backspace (why?).
      10                           # Results may not be quite as expected.
      11 echo; echo

  • Ctl-J

    Carriage return.

  • Ctl-L

    Formfeed (clear the terminal screen). This has the same effect as the clear command.

  • Ctl-M

    Newline.

  • Ctl-U

    Erase a line of input.

  • Ctl-Z

    Pause a foreground job.

Whitespace

functions as a separator, separating commands or variables. Whitespace consists of either spaces, tabs, blank lines, or any combination thereof. In some contexts, such as variable assignment, whitespace is not permitted, and results in a syntax error.

Blank lines have no effect on the action of a script, and are therefore useful for visually separating functional sections.

$IFS, the special variable separating fields of input to certain commands, defaults to whitespace.

Notes

[1]

The shell does the brace expansion. The command itself acts upon the result of the expansion.

[2]

Exception: a code block in braces as part of a pipe may be run as a subshell.
   1 ls | { read firstline; read secondline; }
   2 # Error. The code block in braces runs as a subshell,
   3 # so the output of "ls" cannot be passed to variables within the block.
   4 echo "First line is $firstline; second line is $secondline"  # Will not work.
   5 
   6 # Thanks, S.C.