20.7. urllib.parse — Parse URLs into components

Source code: Lib/urllib/parse.py


This module defines a standard interface to break Uniform Resource Locator (URL) strings up in components (addressing scheme, network location, path etc.), to combine the components back into a URL string, and to convert a “relative URL” to an absolute URL given a “base URL.”

The module has been designed to match the Internet RFC on Relative Uniform Resource Locators (and discovered a bug in an earlier draft!). It supports the following URL schemes: file, ftp, gopher, hdl, http, https, imap, mailto, mms, news, nntp, prospero, rsync, rtsp, rtspu, sftp, shttp, sip, sips, snews, svn, svn+ssh, telnet, wais.

The urllib.parse module defines functions that fall into two broad categories: URL parsing and URL quoting. These are covered in detail in the following sections.

20.7.1. URL Parsing

The URL parsing functions focus on splitting a URL string into its components, or on combining URL components into a URL string.

urllib.parse.urlparse(urlstring, scheme='', allow_fragments=True)

Parse a URL into six components, returning a 6-tuple. This corresponds to the general structure of a URL: scheme://netloc/path;parameters?query#fragment. Each tuple item is a string, possibly empty. The components are not broken up in smaller parts (for example, the network location is a single string), and % escapes are not expanded. The delimiters as shown above are not part of the result, except for a leading slash in the path component, which is retained if present. For example:

>>> from urllib.parse import urlparse
>>> o = urlparse('http://www.cwi.nl:80/%7Eguido/Python.html')
>>> o   
ParseResult(scheme='http', netloc='www.cwi.nl:80', path='/%7Eguido/Python.html',
            params='', query='', fragment='')
>>> o.scheme
'http'
>>> o.port
80
>>> o.geturl()
'http://www.cwi.nl:80/%7Eguido/Python.html'

Following the syntax specifications in RFC 1808, urlparse recognizes a netloc only if it is properly introduced by ‘//’. Otherwise the input is presumed to be a relative URL and thus to start with a path component.

>>> from urllib.parse import urlparse
>>> urlparse('//www.cwi.nl:80/%7Eguido/Python.html')
ParseResult(scheme='', netloc='www.cwi.nl:80', path='/%7Eguido/Python.html',
           params='', query='', fragment='')
>>> urlparse('www.cwi.nl:80/%7Eguido/Python.html')
ParseResult(scheme='', netloc='', path='www.cwi.nl:80/%7Eguido/Python.html',
           params='', query='', fragment='')
>>> urlparse('help/Python.html')
ParseResult(scheme='', netloc='', path='help/Python.html', params='',
           query='', fragment='')

If the scheme argument is specified, it gives the default addressing scheme, to be used only if the URL does not specify one. The default value for this argument is the empty string.

If the allow_fragments argument is false, fragment identifiers are not allowed, even if the URL’s addressing scheme normally does support them. The default value for this argument is True.

The return value is actually an instance of a subclass of tuple. This class has the following additional read-only convenience attributes:

Attribute Index Value Value if not present
scheme 0 URL scheme specifier empty string
netloc 1 Network location part empty string
path 2 Hierarchical path empty string
params 3 Parameters for last path element empty string
query 4 Query component empty string
fragment 5 Fragment identifier empty string
username   User name None
password   Password None
hostname   Host name (lower case) None
port   Port number as integer, if present None

See section Structured Parse Results for more information on the result object.

Changed in version 3.2: Added IPv6 URL parsing capabilities.

urllib.parse.parse_qs(qs, keep_blank_values=False, strict_parsing=False, encoding='utf-8', errors='replace')

Parse a query string given as a string argument (data of type application/x-www-form-urlencoded). Data are returned as a dictionary. The dictionary keys are the unique query variable names and the values are lists of values for each name.

The optional argument keep_blank_values is a flag indicating whether blank values in percent-encoded queries should be treated as blank strings. A true value indicates that blanks should be retained as blank strings. The default false value indicates that blank values are to be ignored and treated as if they were not included.

The optional argument strict_parsing is a flag indicating what to do with parsing errors. If false (the default), errors are silently ignored. If true, errors raise a ValueError exception.

The optional encoding and errors parameters specify how to decode percent-encoded sequences into Unicode characters, as accepted by the bytes.decode() method.

Use the urllib.parse.urlencode() function to convert such dictionaries into query strings.

Changed in version 3.2: Add encoding and errors parameters.

urllib.parse.parse_qsl(qs, keep_blank_values=False, strict_parsing=False, encoding='utf-8', errors='replace')

Parse a query string given as a string argument (data of type application/x-www-form-urlencoded). Data are returned as a list of name, value pairs.

The optional argument keep_blank_values is a flag indicating whether blank values in percent-encoded queries should be treated as blank strings. A true value indicates that blanks should be retained as blank strings. The default false value indicates that blank values are to be ignored and treated as if they were not included.

The optional argument strict_parsing is a flag indicating what to do with parsing errors. If false (the default), errors are silently ignored. If true, errors raise a ValueError exception.

The optional encoding and errors parameters specify how to decode percent-encoded sequences into Unicode characters, as accepted by the bytes.decode() method.

Use the urllib.parse.urlencode() function to convert such lists of pairs into query strings.

Changed in version 3.2: Add encoding and errors parameters.

urllib.parse.urlunparse(parts)

Construct a URL from a tuple as returned by urlparse(). The parts argument can be any six-item iterable. This may result in a slightly different, but equivalent URL, if the URL that was parsed originally had unnecessary delimiters (for example, a ? with an empty query; the RFC states that these are equivalent).

urllib.parse.urlsplit(urlstring, scheme='', allow_fragments=True)

This is similar to urlparse(), but does not split the params from the URL. This should generally be used instead of urlparse() if the more recent URL syntax allowing parameters to be applied to each segment of the path portion of the URL (see RFC 2396) is wanted. A separate function is needed to separate the path segments and parameters. This function returns a 5-tuple: (addressing scheme, network location, path, query, fragment identifier).

The return value is actually an instance of a subclass of tuple. This class has the following additional read-only convenience attributes:

Attribute Index Value Value if not present
scheme 0 URL scheme specifier empty string
netloc 1 Network location part empty string
path 2 Hierarchical path empty string
query 3 Query component empty string
fragment 4 Fragment identifier empty string
username   User name None
password   Password None
hostname   Host name (lower case) None
port   Port number as integer, if present None

See section Structured Parse Results for more information on the result object.

urllib.parse.urlunsplit(parts)

Combine the elements of a tuple as returned by urlsplit() into a complete URL as a string. The parts argument can be any five-item iterable. This may result in a slightly different, but equivalent URL, if the URL that was parsed originally had unnecessary delimiters (for example, a ? with an empty query; the RFC states that these are equivalent).

urllib.parse.urljoin(base, url, allow_fragments=True)

Construct a full (“absolute”) URL by combining a “base URL” (base) with another URL (url). Informally, this uses components of the base URL, in particular the addressing scheme, the network location and (part of) the path, to provide missing components in the relative URL. For example:

>>> from urllib.parse import urljoin
>>> urljoin('http://www.cwi.nl/%7Eguido/Python.html', 'FAQ.html')
'http://www.cwi.nl/%7Eguido/FAQ.html'

The allow_fragments argument has the same meaning and default as for urlparse().

Note

If url is an absolute URL (that is, starting with // or scheme://), the url‘s host name and/or scheme will be present in the result. For example:

>>> urljoin('http://www.cwi.nl/%7Eguido/Python.html',
...         '//www.python.org/%7Eguido')
'http://www.python.org/%7Eguido'

If you do not want that behavior, preprocess the url with urlsplit() and urlunsplit(), removing possible scheme and netloc parts.

urllib.parse.urldefrag(url)

If url contains a fragment identifier, return a modified version of url with no fragment identifier, and the fragment identifier as a separate string. If there is no fragment identifier in url, return url unmodified and an empty string.

The return value is actually an instance of a subclass of tuple. This class has the following additional read-only convenience attributes:

Attribute Index Value Value if not present
url 0 URL with no fragment empty string
fragment 1 Fragment identifier empty string

See section Structured Parse Results for more information on the result object.

Changed in version 3.2: Result is a structured object rather than a simple 2-tuple.

20.7.2. Parsing ASCII Encoded Bytes

The URL parsing functions were originally designed to operate on character strings only. In practice, it is useful to be able to manipulate properly quoted and encoded URLs as sequences of ASCII bytes. Accordingly, the URL parsing functions in this module all operate on bytes and bytearray objects in addition to str objects.

If str data is passed in, the result will also contain only str data. If bytes or bytearray data is passed in, the result will contain only bytes data.

Attempting to mix str data with bytes or bytearray in a single function call will result in a TypeError being raised, while attempting to pass in non-ASCII byte values will trigger UnicodeDecodeError.

To support easier conversion of result objects between str and bytes, all return values from URL parsing functions provide either an encode() method (when the result contains str data) or a decode() method (when the result contains bytes data). The signatures of these methods match those of the corresponding str and bytes methods (except that the default encoding is 'ascii' rather than 'utf-8'). Each produces a value of a corresponding type that contains either bytes data (for encode() methods) or str data (for decode() methods).

Applications that need to operate on potentially improperly quoted URLs that may contain non-ASCII data will need to do their own decoding from bytes to characters before invoking the URL parsing methods.

The behaviour described in this section applies only to the URL parsing functions. The URL quoting functions use their own rules when producing or consuming byte sequences as detailed in the documentation of the individual URL quoting functions.

Changed in version 3.2: URL parsing functions now accept ASCII encoded byte sequences

20.7.3. Structured Parse Results

The result objects from the urlparse(), urlsplit() and urldefrag() functions are subclasses of the tuple type. These subclasses add the attributes listed in the documentation for those functions, the encoding and decoding support described in the previous section, as well as an additional method:

urllib.parse.SplitResult.geturl()

Return the re-combined version of the original URL as a string. This may differ from the original URL in that the scheme may be normalized to lower case and empty components may be dropped. Specifically, empty parameters, queries, and fragment identifiers will be removed.

For urldefrag() results, only empty fragment identifiers will be removed. For urlsplit() and urlparse() results, all noted changes will be made to the URL returned by this method.

The result of this method remains unchanged if passed back through the original parsing function:

>>> from urllib.parse import urlsplit
>>> url = 'HTTP://www.Python.org/doc/#'
>>> r1 = urlsplit(url)
>>> r1.geturl()
'http://www.Python.org/doc/'
>>> r2 = urlsplit(r1.geturl())
>>> r2.geturl()
'http://www.Python.org/doc/'

The following classes provide the implementations of the structured parse results when operating on str objects:

class urllib.parse.DefragResult(url, fragment)

Concrete class for urldefrag() results containing str data. The encode() method returns a DefragResultBytes instance.

New in version 3.2.

class urllib.parse.ParseResult(scheme, netloc, path, params, query, fragment)

Concrete class for urlparse() results containing str data. The encode() method returns a ParseResultBytes instance.

class urllib.parse.SplitResult(scheme, netloc, path, query, fragment)

Concrete class for urlsplit() results containing str data. The encode() method returns a SplitResultBytes instance.

The following classes provide the implementations of the parse results when operating on bytes or bytearray objects:

class urllib.parse.DefragResultBytes(url, fragment)

Concrete class for urldefrag() results containing bytes data. The decode() method returns a DefragResult instance.

New in version 3.2.

class urllib.parse.ParseResultBytes(scheme, netloc, path, params, query, fragment)

Concrete class for urlparse() results containing bytes data. The decode() method returns a ParseResult instance.

New in version 3.2.

class urllib.parse.SplitResultBytes(scheme, netloc, path, query, fragment)

Concrete class for urlsplit() results containing bytes data. The decode() method returns a SplitResult instance.

New in version 3.2.

20.7.4. URL Quoting

The URL quoting functions focus on taking program data and making it safe for use as URL components by quoting special characters and appropriately encoding non-ASCII text. They also support reversing these operations to recreate the original data from the contents of a URL component if that task isn’t already covered by the URL parsing functions above.

urllib.parse.quote(string, safe='/', encoding=None, errors=None)

Replace special characters in string using the %xx escape. Letters, digits, and the characters '_.-' are never quoted. By default, this function is intended for quoting the path section of URL. The optional safe parameter specifies additional ASCII characters that should not be quoted — its default value is '/'.

string may be either a str or a bytes.

The optional encoding and errors parameters specify how to deal with non-ASCII characters, as accepted by the str.encode() method. encoding defaults to 'utf-8'. errors defaults to 'strict', meaning unsupported characters raise a UnicodeEncodeError. encoding and errors must not be supplied if string is a bytes, or a TypeError is raised.

Note that quote(string, safe, encoding, errors) is equivalent to quote_from_bytes(string.encode(encoding, errors), safe).

Example: quote('/El Niño/') yields '/El%20Ni%C3%B1o/'.

urllib.parse.quote_plus(string, safe='', encoding=None, errors=None)

Like quote(), but also replace spaces by plus signs, as required for quoting HTML form values when building up a query string to go into a URL. Plus signs in the original string are escaped unless they are included in safe. It also does not have safe default to '/'.

Example: quote_plus('/El Niño/') yields '%2FEl+Ni%C3%B1o%2F'.

urllib.parse.quote_from_bytes(bytes, safe='/')

Like quote(), but accepts a bytes object rather than a str, and does not perform string-to-bytes encoding.

Example: quote_from_bytes(b'a&\xef') yields 'a%26%EF'.

urllib.parse.unquote(string, encoding='utf-8', errors='replace')

Replace %xx escapes by their single-character equivalent. The optional encoding and errors parameters specify how to decode percent-encoded sequences into Unicode characters, as accepted by the bytes.decode() method.

string must be a str.

encoding defaults to 'utf-8'. errors defaults to 'replace', meaning invalid sequences are replaced by a placeholder character.

Example: unquote('/El%20Ni%C3%B1o/') yields '/El Niño/'.

urllib.parse.unquote_plus(string, encoding='utf-8', errors='replace')

Like unquote(), but also replace plus signs by spaces, as required for unquoting HTML form values.

string must be a str.

Example: unquote_plus('/El+Ni%C3%B1o/') yields '/El Niño/'.

urllib.parse.unquote_to_bytes(string)

Replace %xx escapes by their single-octet equivalent, and return a bytes object.

string may be either a str or a bytes.

If it is a str, unescaped non-ASCII characters in string are encoded into UTF-8 bytes.

Example: unquote_to_bytes('a%26%EF') yields b'a&\xef'.

urllib.parse.urlencode(query, doseq=False, safe='', encoding=None, errors=None)

Convert a mapping object or a sequence of two-element tuples, which may either be a str or a bytes, to a “percent-encoded” string. If the resultant string is to be used as a data for POST operation with urlopen() function, then it should be properly encoded to bytes, otherwise it would result in a TypeError.

The resulting string is a series of key=value pairs separated by '&' characters, where both key and value are quoted using quote_plus() above. When a sequence of two-element tuples is used as the query argument, the first element of each tuple is a key and the second is a value. The value element in itself can be a sequence and in that case, if the optional parameter doseq is evaluates to True, individual key=value pairs separated by '&' are generated for each element of the value sequence for the key. The order of parameters in the encoded string will match the order of parameter tuples in the sequence.

When query parameter is a str, the safe, encoding and error parameters are passed down to quote_plus() for encoding.

To reverse this encoding process, parse_qs() and parse_qsl() are provided in this module to parse query strings into Python data structures.

Refer to urllib examples to find out how urlencode method can be used for generating query string for a URL or data for POST.

Changed in version 3.2: Query parameter supports bytes and string objects.

See also

RFC 3986 - Uniform Resource Identifiers
This is the current standard (STD66). Any changes to urllib.parse module should conform to this. Certain deviations could be observed, which are mostly for backward compatibility purposes and for certain de-facto parsing requirements as commonly observed in major browsers.
RFC 2732 - Format for Literal IPv6 Addresses in URL’s.
This specifies the parsing requirements of IPv6 URLs.
RFC 2396 - Uniform Resource Identifiers (URI): Generic Syntax
Document describing the generic syntactic requirements for both Uniform Resource Names (URNs) and Uniform Resource Locators (URLs).
RFC 2368 - The mailto URL scheme.
Parsing requirements for mailto url schemes.
RFC 1808 - Relative Uniform Resource Locators
This Request For Comments includes the rules for joining an absolute and a relative URL, including a fair number of “Abnormal Examples” which govern the treatment of border cases.
RFC 1738 - Uniform Resource Locators (URL)
This specifies the formal syntax and semantics of absolute URLs.